How to Tighten Chain on Stihl Pole Saw: A Step-by-Step Guide for Proper Maintenance

If you own a Stihl pole saw, you know how handy it can be for trimming those hard-to-reach branches. However, like any tool, it’s important to keep it well-maintained to ensure optimal performance. One of the key maintenance tasks is keeping the chain tight.

A loose chain can lead to inefficient cutting, premature wear and tear, and even safety hazards. Luckily, tightening the chain on a Stihl pole saw is a fairly simple process that can be done with just a few tools and some basic know-how. In this blog post, we’ll walk you through exactly how to tighten the chain on your Stihl pole saw, step by step.

Whether you’re a seasoned pro or a beginner, you’ll be able to tackle this task with ease. So, grab your tools and let’s get started!


If you’re working with Stihl pole saws, it’s essential to know how to tighten the chain properly. A loose chain can cause a lot of problems, including damage to the saw, decreased efficiency, and even injuries. Luckily, it’s a simple process that you can do yourself with just a few tools.

The first step is to turn off the saw and let it cool down. Once it’s cooled, you’ll need to remove the bar cover and loosen the chain tensioner screw. Then, you can adjust the chain tension until it’s at the right level and tighten the tensioner screw back up again.

Remember to check the tension regularly and adjust as needed to keep the saw running smoothly. With these tips in mind, you can use your Stihl pole saw with confidence and efficiency.

Explanation of Chainsaw Parts

Chainsaw parts are essential components that work together to ensure the efficient and safe operation of the tool. From the bar and chain to the spark plug and air filter, each part plays a crucial role in the functionality of the chainsaw. The bar and chain work in tandem to make the cutting process possible, while the spark plug ignites the fuel and air mixture necessary for the engine to run.

The air filter is responsible for keeping dust and debris out of the engine, and the oil pump ensures that the chain is lubricated during use. Understanding the purpose and function of each chainsaw part is crucial in both selecting the right tool for the job and maintaining it properly. By familiarizing yourself with the different parts of a chainsaw, you can ensure the continued effectiveness and safety of the tool, providing reliable performance for years to come.

how to tighten chain on stihl pole saw

Saftey Precautions

When it comes to safety, there is nothing more important than taking proper precautions. Whether it’s at home, on the road, or at work, there are always risks involved in our daily activities. That’s why it’s essential to take measures to prevent accidents and protect ourselves from harm.

Safety precautions can range from simple steps like wearing protective gear to more complex strategies, such as developing emergency response plans. It’s important to understand that by taking safety precautions, we’re not only protecting ourselves but also those around us. That’s why it’s crucial to always be aware of potential hazards and take action to mitigate them.

By being proactive and taking safety seriously, we can ensure a safer, healthier, and more secure environment for everyone. So, let’s make safety our top priority and take the necessary precautions to prevent accidents, injuries, and loss of life.

Step-by-Step Instructions

If you’ve noticed that the chain on your Stihl pole saw is loose, it’s important to tighten it before using the saw again. Not only will a loose chain make the saw less effective, but it can also be dangerous. Luckily, tightening the chain on a Stihl pole saw is a simple process that can be done in a few easy steps.

First, you’ll need to make sure the saw is turned off and the chain brake is engaged. Then, use a wrench to loosen the nuts on the guide bar. Next, use a screwdriver to adjust the tension on the chain until it is tight but still able to move smoothly.

Finally, tighten the nuts on the guide bar to secure the chain in place. With these steps, you should be able to easily tighten the chain on your Stihl pole saw and get back to work safely and effectively.

Step 1: Secure the Saw

When it comes to using a saw, safety should always be your top priority. Start by making sure the saw is properly secured before you begin any cutting. This involves finding a sturdy surface where you can place the saw and ensuring that it won’t accidentally fall or move while you’re using it.

If you’re using a handheld saw, make sure you have a secure grip on the handle and always keep your fingers away from the blade. For larger saws, it’s important to secure them to a workbench or sawhorse using clamps or other locking mechanisms. This will help prevent any accidents or injuries that could occur if the saw were to shift or move during use.

By taking the time to secure your saw properly, you can ensure a safe and successful cutting experience every time. Remember, always prioritize safety first!

Step 2: Take Off the Bar Cover

Taking off the bar cover is the next step in disassembling your NordicTrack treadmill. The bar cover is the part that encloses the front upright bar, which is necessary to remove to access the other parts of the machine. Start by locating the screws that hold the cover in place; they’re usually found at the bottom of the cover and sometimes at the top.

Once located, use a Phillips-head screwdriver to unscrew them. Some models may have tabs that secure the cover, so make sure to release them properly. Once all screws and tabs are removed, gently lift the cover off the bar.

Be careful not to damage the cover or the bar while doing this. Sometimes the cover may be stuck or require more force to remove, so don’t hesitate to use slight pressure. With the cover out of the way, you can now move on to the other parts of the treadmill that require disassembling.

Taking off the bar cover is simple, but it opens up access to make the other steps much simpler.

Step 3: Loosen the Bar Nuts

Now that you’ve located the bar nuts, it’s time to loosen them in order to properly adjust the tension on your chainsaw chain. Simply use the proper sized wrench or socket to loosen the nuts, but don’t remove them completely just yet. It’s important to keep the bar and chain in place until the tension is adjusted to prevent any mishaps.

Once the nuts are loosened, you can move on to the next step in the process. Remember to take your time and be careful when handling your chainsaw to ensure your own safety and the longevity of your machine. By following these steps and taking proper care of your equipment, you can ensure that your chainsaw will continue to work effectively and efficiently for years to come.

Step 4: Adjust the Tension Screw

Adjusting the tension screw on your sewing machine can be intimidating, but it’s an essential step to ensure your stitches are even and steady. To begin, you’ll need to locate the tension dial on your machine. This is usually located at the top, near the needle.

Once you’ve identified it, turn the tension dial to “4”. This is the default setting for most machines. Now, take a piece of scrap fabric and stitch a test seam.

Examine the stitches to see if they’re too loose or too tight. If the stitches are too loose, turn the tension dial up, towards a higher number. If they’re too tight, turn the dial down, towards a lower number.

Keep testing and adjusting until you get your desired stitch tension. Remember, the key is to make small adjustments until you find the right setting. With practice, you’ll become more comfortable and confident in adjusting your sewing machine’s tension screw.

Step 5: Check the Tightness

Once the plumbing system has been installed, it is essential to check for tightness to prevent any future leaks. The final step in this process is to connect the water supply and turn it on to see if it works correctly. To do this, check all fixtures for any leaks.

If there are leakages, tighten the connections and recheck until all fixtures have been examined. Properly tightened plumbing fixtures will not only prevent leaks but also ensure efficient water flow throughout the home. A water leak can cause extensive damage to your home’s foundation, walls, and floors, so checking tightness is vital.

Always make sure to have a reliable plumber check and maintain your plumbing system regularly to reduce the likelihood of leaks occurring. It is also essential to use high-quality plumbing materials because they are more durable and will last longer. By taking these preventative measures, you can avoid expensive repairs down the line and ensure your plumbing system is functioning correctly.


In conclusion, tightening the chain on your Stihl pole saw is a task that can seem daunting at first, but with a little patience and the right technique, it can be a breeze. Don’t let a loose chain hold you back from achieving your pruning and trimming goals. Follow these steps, and you’ll be back to trimming with the precision and accuracy that your Stihl pole saw was designed to deliver.

Remember, a well-maintained chainsaw is the key to a well-kept yard, and a happy gardener. So, don’t let the chain slip, tighten it up and enjoy the satisfaction of a job well done!”

Additional Tips

Now that we’ve covered the step-by-step instructions to create a successful blog section, let’s dive into some additional tips to help take your content to the next level. First and foremost, it’s crucial to make sure you’re targeting the right keywords for your blog post. You can use various keyword research tools to ensure you optimize your content for search engines.

It’s also essential to include internal and external links to your blog section. Internal links will help keep readers on your site, while external links will add credibility and value to your content. Another crucial element is to ensure that your blog posts are visually appealing and easy to read.

Use high-quality images, plenty of white space, and short paragraphs to make your content more accessible. Finally, don’t forget to use social media to promote your blog section and engage your audience. By using these additional tips, your blog section will not only be more engaging but also more effective at driving traffic and growing your business.

Final Thoughts

Final Thoughts Now that we have gone through the step-by-step instructions on how to create a successful blog post, it’s time to put it into action. Remember, writing a blog post is not just about delivering information, but it is also about connecting with your audience. So, try to incorporate your personal experiences and thoughts into your writing to make it more relatable and engaging.

Don’t be afraid to experiment with different writing styles and formats to see what resonates with your readers. And most importantly, keep your readers in mind while creating the content. Ask yourself, what value does this post bring to my audience? How can I make it more interesting and engaging for them? By doing this, you will be able to create blog posts that are not only informative but also entertaining and enjoyable to read.


What tools do I need to tighten the chains on my Stihl pole saw?
To tighten the chain on your Stihl pole saw, you will need a scrench, a flat file, and a round file.

How often should I tighten the chains on my Stihl pole saw?
It is recommended to tighten the chain every time you refuel your saw or every time you use it for an extended period.

Can I tighten the chains on my Stihl pole saw by hand?
No, you need to use a scrench to properly tighten the chains on your Stihl pole saw.

How do I know if the chains on my Stihl pole saw are too loose?
You can tell if the chains on your Stihl pole saw are too loose if they sag away from the guide bar or make a rattling sound when in use.

How tight should the chains on my Stihl pole saw be?
The chains on your Stihl pole saw should be tight enough that they do not sag away from the guide bar but loose enough that they can be pulled easily by hand.

What is the proper way to file a Stihl pole saw chain?
You should use a flat file for the cutting edge of the teeth and a round file for the depth gauges.

Should I replace my chains or just tighten them when they become loose?
It is recommended to replace your chains as soon as they become loose or worn to maintain the safety and efficiency of your Stihl pole saw.

Show More

Related Articles