How to Put Chain on Pole Saw for Effortless Pruning – A Beginner’s Guide

Do you have a pole saw that needs a new chain, but you’re not sure how to replace it? Don’t fret – it’s easier than you think! Putting a chain on a pole saw can seem intimidating at first, but with a little know-how, you can have your saw in working order in no time. In this article, we’ll walk you through the step-by-step process of putting a new chain on your pole saw, from removing the old chain to adjusting the tension on the new one. So grab your saw and let’s get started!


Putting a chain on a pole saw might seem like a daunting task, but with a little bit of practice, it can be done quite easily. First, make sure your saw is turned off and the chain brake is engaged. Next, loosen the nuts that are holding the bar and chain in place.

Once loose, remove the bar and chain from the saw. The next step is to place the chain onto the bar. Make sure the teeth on the chain are facing the correct way.

Then, slide the bar and chain back onto the saw, making sure the chain is seated correctly in the sprocket and the guide bar. Finally, tighten the nuts on the bar to the manufacturer’s specifications, and you’re ready to get back to work. Remember to always wear protective gear and follow safety guidelines when using your pole saw.

By following these simple steps, you can quickly and easily learn how to put a chain on your pole saw and keep it working efficiently.

Explanation of Pole Saw Chains

When it comes to using a pole saw, it’s essential to understand the different types of chains available. Pole saw chains are not one-size-fits-all, and choosing the right one can make a significant difference in your cutting performance. The most common types of chains are the standard and low profile chains.

The standard chain is perfect for general use, while the low profile chain is ideal for cutting through small limbs and branches. When looking for a chain, it’s important to consider the pitch, gauge, and number of drive links, which determine the fit and performance of the saw. By understanding the types of chains available and their features, you can ensure you get the best results from your pole saw.

how to put chain on pole saw

Safety Precautions Before Proceeding

Before embarking on any task, safety should always come first. It is an essential aspect to consider, be it at home or at work. Accidents can happen abruptly and can cause severe injuries or even fatalities.

To avoid any mishaps, it is critical to take some safety precautions before proceeding. These precautions include wearing protective gear, ensuring the work environment is safe, that all the necessary tools and equipment are in good condition, and having the required knowledge and skills to handle the task at hand. Remember, you only have one life to live, and safety should always be a top priority.

By taking these safety measures, you can ensure that you carry out your work with minimal risks and that you stay safe and sound always.

Steps to Put a Chain on a Pole Saw

Putting a chain on a pole saw is easier than you might think. To start, you’ll want to gather your tools which includes a screwdriver, a flat file, and the new chain. Begin by releasing the tension on the saw chain by turning the tension adjuster counterclockwise.

Once the tension has been released, remove the old chain and begin to thread the new chain around the sprocket and bar. Ensure that the cutting edge of the teeth are facing towards the direction of chain rotation. Once you have it threaded correctly, it’s time to adjust the chain tension.

Tighten the tension until the chain is snug against the bar and sprocket, but not too tight. If the chain sags, adjust again until there is no sagging. To make sure the chain is cutting properly, file the cutters on the chain using the flat file until they are sharp and properly shaped.

And that’s it! Your pole saw is now ready to tackle even the toughest outdoor projects.

Step 1: Gather Necessary Tools

Putting a chain on a pole saw can be a daunting task, but it is straightforward if you have the necessary tools and follow a few simple steps. To begin, you’ll need a replacement chain, socket wrench, and screwdriver. Once you have these tools, it’s time to get started by removing the old chain from your pole saw with the socket wrench.

Next, you’ll want to ensure that the new chain is the right fit for your pole saw, making sure you have the correct gauge, pitch, and length. After that, use the screwdriver to loosen the chain tensioner and slide the new chain onto the bar. Finally, adjust the chain tensioner to ensure the chain is tight and in place properly.

By following these simple steps, you’ll be able to put a new chain on your pole saw with ease, and your pole saw will be running smoothly again in no time!

Step 2: Loosen the Tension Screw

Putting a chain on a pole saw may seem intimidating, but it’s actually a relatively simple task. In this blog section, we’ll be discussing step two of the process: loosening the tension screw. The tension screw can be found near the base of the saw blade.

You’ll need to use an Allen wrench to loosen the screw, which will release the tension on the saw’s chain. It’s important to note that the amount of tension necessary will depend on the make and model of your saw, so be sure to consult your owner’s manual for specific instructions. Once you’ve loosened the tension screw, you can remove the old chain and prepare to replace it with a new one.

With a little practice, putting a chain on your pole saw will become a quick and easy task.

Step 3: Remove the Old Chain

Putting a new chain on a pole saw requires removing the old one first. This may seem like a daunting task, but it’s actually quite simple. Begin by unplugging the pole saw, disconnecting the spark plug, or removing the battery pack to ensure your safety.

Then, use a wrench to loosen the nut on the chainsaw’s guide bar and pull the bar, and the old chain, off. It’s important to inspect the guide bar for wear and tear before installing a new chain as a damaged or worn bar can cause problems with the new chain’s performance. With the old chain removed, you’re one step closer to successfully putting a new one on your pole saw.

Step 4: Install the New Chain

Installing a new chain on a pole saw may seem intimidating, but it doesn’t have to be. After you have chosen the correct chain for your saw and removed the old one, it’s time to install the new chain. Begin by positioning the chain over the bar, making sure the cutting teeth are facing towards the nose of the blade.

Then, slowly lift the chainsaw guide bar and align it with the hole on the chainsaw body. Push the bar towards the body until it clicks into place, ensuring that the chain is properly tensioned. Once the bar is secure, use the adjustment screw to tighten the chain until it fits snugly around the bar.

Finally, test the new chain by gently revving the saw, making sure it runs smoothly and without any snags or issues. By following these simple steps, you can easily install a new chain on your pole saw and get back to your outdoor projects in no time!

Step 5: Tighten the Chain and Check Tension

Putting a chain on a pole saw is not a difficult task when you follow specific steps. We’ve already covered the first 4 steps, which include inspecting the saw, removing the old chain, fitting the new chain, and threading the chain. Now, it’s time to tighten the chain and check its tension.

This is extremely important since a loose chain can fly off the saw and cause serious injury or damage. To tighten the chain, you’ll need to locate the tensioning screw and adjust it accordingly. It’s essential to refer to the pole saw’s user manual since different models have different tensioning mechanisms.

Moreover, it’s important to check the tension since an overtightened chain can damage the saw or even snap during use. The ideal way to check the chain tension is by pulling the chain away from the guide bar and measuring the distance. If the chain pulls more than a quarter inch, it’s too loose, and if it doesn’t move at all, it’s too tight.

Adjust the tension until you get the ideal distance. Finally, you’re done! You’ve successfully put a chain on a pole saw, and it’s ready to use. Happy pruning!

Tips for Maintaining Your Pole Saw Chain

If you’re interested in maintaining your pole saw chain, there are a few tips you should consider. Firstly, ensure that your chain is properly lubricated with oil, as this helps to prevent damage. You should also keep an eye on the sharpness of your chain, as a dull chain can lead to dangerous slips and reduced power.

If you need to put a new chain on your pole saw, start by loosening the side panel and removing the bolts holding the bar in place. Then, slide off the old chain and replace it with the new one, taking care to ensure that the teeth are facing the right way. Finally, re-tighten the bolts and adjust the tension as needed.

By taking these steps, you’ll be able to keep your pole saw chain in top condition and make sure that it’s able to perform at its best.

Clean Your Chain Regularly

Maintaining your pole saw chain is an essential part of ensuring longevity and optimal performance of your pole saw. One of the easiest ways to maintain your pole saw chain is by regularly cleaning it. A dirty chain will not only reduce cutting performance, but also increase the risk of the chain breaking, making it unsafe to use.

You can clean the chain of your pole saw by either wiping it down with a clean cloth or brushing off any debris with a stiff-bristled brush. You should also ensure that the chain is lubricated before use, as this will help to reduce wear and tear on the chain. Additionally, it is important to check the chain tension regularly to ensure that it is taut and properly aligned.

By taking the time to maintain your pole saw chain, you can be sure that it will continue to work effectively for years to come.

Proper Chain Tension

One of the essential parts of maintaining your pole saw is proper chain tension. If the chain on your pole saw is too loose, it could jump off the bar or even break. On the other hand, if the chain is too tight, it will cause unnecessary wear and tear on the chain and bar.

To make sure your chain tension is correct, you should check it before every use. To do this, use a screwdriver to loosen the two nuts that hold the bar in place. Then, using a flat-head screwdriver on the tensioning screw, adjust the tension until the chain fits snugly onto the bar.

Be careful not to overtighten the chain, as this can cause damage. Taking a few minutes to ensure your chain tension is correct can prolong the life of your pole saw and keep you safe while using it.


Putting a chain on a pole saw may seem daunting at first, but with a little bit of know-how and a lot of elbow grease, you can have your saw up and running in no time. Don’t let the process chain you down – grab that saw, follow these simple steps, and let your pruning dreams take flight. May your cuts be clean, your trees be happy, and your saw always be ready for action!”


What is a pole saw chain?
A pole saw chain is a type of chain that is specifically designed for use on a pole saw. It is typically longer than a regular chainsaw chain and fits onto the bar of the pole saw in the same way.

How do I know which chain to use on my pole saw?
The chain size for your pole saw should be specified in the user manual. Look for the model number of your saw and check the manufacturer’s recommendations for the correct chain size and type.

How do I remove the old chain from my pole saw?
To remove the old chain from your pole saw, you’ll need to loosen the tensioning screw or knob located near the base of the pole saw. Once the tension is released, you can slide the chain off the bar and remove it from the saw.

How do I install a new chain on my pole saw?
To install a new chain on your pole saw, start by threading the chain onto the bar in the correct direction. Then, use the tensioning screw or knob to adjust the tension of the chain until it is snug against the bar. Finally, tighten the retaining nuts to hold the chain in place.

How often should I replace the chain on my pole saw?
The lifespan of a pole saw chain can vary depending on the frequency of use and the type of material being cut. However, as a general rule, it’s recommended to replace your chainsaw chain every 1,000 cuts or when you notice that the teeth are becoming dull.

What should I do if my pole saw chain keeps coming loose?
If your pole saw chain keeps coming loose, it could be due to a loose tensioning screw. Check to make sure that the screw is tightened to the proper torque level recommended by the manufacturer. Additionally, make sure that the retaining nuts are secure and that the chain is properly lubricated.

How do I maintain my pole saw chain to ensure optimal performance?
To maintain your pole saw chain, it’s important to keep it clean and lubricated. After each use, wipe down the chain with a dry cloth to remove any debris or sawdust. Then, apply a small amount of bar and chain oil to the chain to keep it lubricated and prevent rust.

Show More

Related Articles