How to Put Chain on Ryobi Pole Saw: A Step-by-Step Guide for Beginners

Greetings! If you own a Ryobi pole saw, you know how essential it is to maintain its parts and ensure it’s functioning correctly. One of the most important components of your Ryobi pole saw is its chain, which can become dull and damaged over time. If you’re finding it challenging to put a chain on your Ryobi pole saw, you’re not alone.

But worry not, as I’m here to guide you on how to do it step-by-step. In this informative blog post, I will share with you a detailed guide on how to put chain on Ryobi pole saw to ensure optimal performance and safety. So, if you’re ready to learn, let’s dive in!

Ensure Safety First

When using any type of power tool, it’s always crucial to prioritize safety. Before even attempting to put the chain on your Ryobi pole saw, make sure the saw is turned off and disconnected from any power source. Wear gloves to protect your hands from any potential cuts or scrapes while handling the chain, and eye protection to guard against flying debris.

Once you’ve ensured your safety, loosen the screws on the side panel of the saw to access the chain. Carefully thread the chain around the bar, making sure it’s properly aligned and seated in the groove before tightening the screws back in place. Finally, adjust the tension of the chain so that it’s snug but still able to move freely along the bar.

Taking these safety precautions and following proper installation procedures will help ensure both your safety and the longevity of your Ryobi pole saw.

Wear protective gear and gloves.

When it comes to working with hazardous materials, ensuring safety should always be your top priority. One way to protect yourself is by wearing the appropriate protective gear and gloves. This gear is specifically designed to shield you from potential harm and can include items such as goggles, respirators, aprons, and gloves made from materials like latex, nitrile, or neoprene.

These materials are chosen for their ability to resist chemicals and other harmful substances. By wearing protective gear and gloves, you’re not only protecting yourself but also those around you who may come into contact with the hazardous material. So, before starting any task that involves dangerous substances, make sure you have the necessary safety gear to keep yourself safe.

Remember, safety always comes first.

how to put chain on ryobi pole saw

Make sure the saw is turned off and the battery is removed.

When using a saw, your top priority should always be safety. Before performing any maintenance or making any adjustments to your saw, it’s essential to ensure that the saw is turned off and that the battery is removed. Doing so will prevent the saw from accidently being turned on, ensuring that you and those nearby remain out of harm’s way.

Even if you’re an experienced saw user, accidents can still happen, so it’s always best to take precautions and prioritize safety. Whether you’re a homeowner doing DIY projects or a professional contractor, make sure you take safety seriously and always remember to remove the battery and turn off your saw before making any adjustments or performing maintenance. By doing so, you’ll be able to safeguard yourself against potential accidents and ensure that you stay safe while completing your projects.

So, always remember to put safety first!

Prepare the Saw

If you’re wondering how to put a chain on your Ryobi pole saw, the first step is to prepare the saw. Safely secure the saw in a vise or clamp before proceeding. Loosen the bar nuts and remove the bar and chain cover.

Then, take out the old chain, making sure to note the correct orientation of the drive links. This will come in handy when you’re installing the new chain. Once the old chain is removed, clean the bar and groove of any debris or sawdust.

This will ensure the new chain sits properly on the bar. After cleaning the bar and groove, inspect the sprocket and remove any debris. Once everything is clean, it’s time to install the new chain.

Remember to orient the drive links correctly, so they fit snugly in the groove. Once the chain is properly in place, adjust the tension to ensure the chain is tight enough to stay on without being too tight to move. With these simple steps, you’ll have your Ryobi pole saw running like new in no time.

Loosen the bar nuts with a wrench.

When it comes to preparing your saw for use, one critical step is to loosen the bar nuts with a wrench to ensure that the bar and chain move smoothly. This step may seem simple, but it is essential for both your safety and the efficiency of your saw. By loosening the bar nuts, you can remove the guide bar and access the chain for sharpening or replacement.

However, it’s crucial to keep in mind that the chain must be appropriately tightened once you finish your work. Loose chains can easily come off track or damage the saw, which leads to costly repairs. So, ensure that you follow the manufacturer’s guidelines for proper chain tension and tighten the bar nuts securely after adjusting the chain.

With this simple preparation method, you can keep your saw in excellent condition and ready for any cutting job.

Slide the bar down and remove the old chain.

If you’re getting ready to replace the chain on your saw, it’s important to prepare the tool first. To start, make sure the saw is turned off and disconnect the power source. Then, slide the bar down and remove the old chain.

This may take a bit of effort and you may need to use a screwdriver or other tool to loosen the tensioning screw. Once the old chain is off, inspect the bar and sprocket for any damage or wear. If everything looks good, it’s time to select a new chain that matches the specifications of your saw.

When the new chain is ready to be installed, you can start by sliding it over the bar and into the sprocket teeth. Make sure the cutting edges of the chain are facing in the right direction and the tensioning screw is loose enough to allow the chain to fit on the bar without too much resistance. With the chain in place, slide the bar back up and adjust the tensioning screw to the desired tightness before tightening everything up and testing your saw.

By taking these preparatory steps, you can ensure a successful chain replacement without risking damage to your saw or injury to yourself.

Attach the New Chain

Putting a chain on your Ryobi pole saw may seem daunting at first, but it’s actually a pretty straightforward process. First, make sure your saw is turned off and unplugged before attempting any maintenance. Once you’ve done that, loosen the retaining bolts that hold the chain guide bar in place and remove the old chain.

Next, attach the new chain by aligning the drive links with the sprocket and laying the chain over the guide bar with the teeth facing towards the bar. Now, reattach the chain guide bar and tighten the retaining bolts until they’re snug. Finally, adjust the chain tension by using the tensioning screw until the chain isn’t sagging and has a comfortable amount of tension.

And voila! You’re all set to tackle that tree you’ve been eyeing.

Position the chain onto the bar and sprocket.

Attaching the new chain to a chainsaw is vital to ensure smooth operation and optimal performance. To begin with, position the chain onto the bar and sprocket, making sure that the teeth of the chain are facing in the right direction. Then, align the chain with the bar groove to ensure that it fits correctly.

Now, engage the chain with the sprocket by pulling the chain around the sprocket and fitting it closely. Thread the chain around the bar and run it along the groove, ensuring that the cutting teeth are pointing in the right direction. It’s essential to adjust the tension of the chain by turning the tensioning screw or adjusting the tensioner accordingly, making sure that there is enough space between the chain and the bar.

Finally, tighten the nuts that hold the bar and chain in place, but ensure that the chain is not too tight. Now, you are ready to test your chainsaw and put it to use. By following these simple steps, you can easily attach a new chain to your chainsaw and get back to work in no time!

Make sure the cutting teeth are facing the right direction.

When it comes to replacing a chainsaw chain, one of the most important things to keep in mind is to ensure that the cutting teeth are facing the right direction. This may seem like a simple step, but it can have a huge impact on the performance of your chainsaw. Attaching a new chain properly requires some knowledge of the parts of the chain and the saw itself.

Firstly, locate the notch guide on the chainsaw’s bar that will help you align the chain before you start. Then, put the new chain onto the saw’s drive sprocket and make sure it fits snugly in the groove. Next, place the chain over the chainsaw bar ensuring that the cutting teeth are facing away from the chainsaw’s body.

Finally, use the tensioning screw to adjust the chain’s tension. When done correctly, the new chain will run smoothly and last longer, ensuring maximum efficiency and safety.

Thread the chain around the bar and align it.

Attaching a new chain to your chainsaw can be a bit tricky, especially if you’re new to chainsaw maintenance. But don’t worry, it’s not as hard as it sounds. The first step is to thread the chain around the bar and align it correctly.

This is an essential step because if your chain is misaligned, it can cause all sorts of problems. To do this, make sure the chain is facing the right direction and then carefully thread it around the bar. Once it’s in place, make sure the cutting teeth face forward.

To ensure the chain is in the right position, don’t hesitate to check the manufacturer’s instructions. Next, check the tension on the chain. A loose chain can easily come off, while a tight chain can cause damage to your chainsaw.

You want the chain to be tight, but not too tight. Once you’ve checked the tension, use your wrench to tighten the nuts, but don’t overtighten them. It’s important to get this right because an overtightened chain can cause the engine to stall.

Before starting your chainsaw, you’ll also want to lubricate the chain with chainsaw oil. This helps to prevent the chain from wearing down and prolongs the life of your chainsaw. Simply pour the oil over the chain until it’s fully coated.

In conclusion, attaching a new chain to your chainsaw requires a bit of patience and attention to detail. Thread the chain around the bar and align it correctly before checking the tension and tightening the nuts. Don’t forget to lubricate the chain before starting your chainsaw.

Tighten the Chain and Adjust

If you own a Ryobi pole saw, putting the chain back on might seem like a daunting task. However, with a few easy steps, you can have your saw up and running in no time. The first step is to locate the tension screw and adjust it accordingly.

You’ll want to tighten the chain just enough so that it can still move freely but won’t slip off the bar. After adjusting the tension, make sure the chain is seated properly on the sprocket. Next, adjust the chain break so that it engages and disengages smoothly.

Finally, test the saw to ensure that the chain is running smoothly and that the bar oil is properly lubricating the chain. Following these simple steps will allow you to easily put the chain back onto your Ryobi pole saw and get back to work in no time.

Use the tensioning screw to adjust the chain tightness.

The tensioning screw is a crucial component of adjusting and tightening the chain on your machinery or equipment. Whether you’re working on a motorcycle, lawn mower, or power tool, getting the chain tightness just right is critical to ensuring proper function and longevity of the equipment. To adjust the chain tightness, locate the tensioning screw on your machinery and use a wrench to turn it in the appropriate direction.

Tightening the screw will increase chain tension, while loosening it will decrease tension. It’s recommended to check the owner’s manual for specific instructions and torque specifications, as over-tightening can cause excessive wear or even breakage. When adjusting the chain, make sure it has the appropriate amount of slack for optimal function and avoid over-tightening, as this can lead to premature wear and tear.

By taking the time to adjust and tighten your chain correctly, you can save yourself time and money in the long run and extend the lifespan of your equipment.

Check the chain tension and adjust if necessary.

When it comes to maintaining your motorcycle, checking the chain tension is an essential task. A loose chain can cause serious problems, including poor handling and accelerated wear on the chain and sprockets. On the other hand, a chain that’s too tight can cause premature wear and even breakage, which can be dangerous and costly to repair.

So, how do you know if your chain is properly adjusted? One way to check is to measure the chain’s free play, which is the amount of play in the chain when it’s at rest. To do this, push up on the chain near the middle of the swingarm. The chain should move up and down slightly, but not more than an inch or so.

If the chain has too much play, tighten it by adjusting the rear axle nut. Be sure to make small adjustments and check the tension frequently until you achieve the desired amount of play. Remember to keep your chain lubricated and clean to ensure optimum performance and longevity.

With proper chain maintenance, you’ll enjoy a smoother ride and a longer chain life.

Secure the bar nuts and adjust tension again.

Now that you’ve adjusted the tension on your chainsaw chain, it’s time to secure the bar nuts and double-check your work. After all, you don’t want the chain flying off mid-cut and causing damage or injury. Start by hand-tightening the nuts onto the bar, making sure they’re snug but not overly tight.

Then, use a wrench to give them another quarter-turn or so, ensuring they’re properly secured. Once the nuts are in place, recheck the tension on the chain, making any needed adjustments until it’s snug against the bar but still movable with moderate force. Remember, proper tension is key for a safe and effective chainsaw operation.

Don’t hesitate to ask for help or consult the owner’s manual if you’re still unsure about the process. Keep in mind that tightening the chain and adjusting its tension is a crucial step in getting your chainsaw ready for use, and it’s worth taking the time to do it right. Happy sawing!


In conclusion, putting a chainsaw on a Ryobi pole saw is not as daunting as it may seem. It may take a bit of patience and skill, but with practice, it can be a breeze. Just remember to keep safety in mind, as the saw can be quite powerful.

So now you know, putting a chain on a Ryobi pole saw is a bit like threading a needle, but instead of embroidery, you’ll be trimming tree limbs like the pro that you are!”

Following these steps will enable you to put the chain on your Ryobi pole saw easily and safely.

Tightening the chain on your Ryobi pole saw might sound like a daunting task, but it’s actually quite simple when broken down into steps. The first step is to ensure that the chain is completely loose, that way you can easily fit it around the bar and sprocket. Once you’ve done this, it’s time to tighten the chain with the tensioning screw.

Turn the screw counterclockwise to loosen it, then use your wrench to tighten it until the chain is snug against the bar but can still be moved by hand. Remember not to overtighten, as this can cause damage to the chainsaw and make it dangerous to use. Finally, check the chain for tension and make any necessary adjustments.

When you’re finished, test the saw to ensure that the chain is running smoothly and the tension is correct. By following these steps, you’ll be able to put the chain on your Ryobi pole saw easily and safely.


What size chain do I need for my Ryobi pole saw?
The Ryobi pole saw uses a 10-inch chain. Make sure to purchase the correct size when replacing your chain.

How do I install the chain on my Ryobi pole saw?
First, ensure that the saw is unplugged and the chain brake is engaged. Then, remove the old chain if necessary. Next, loop the chain around the guide bar and sprocket, making sure the teeth are facing the right direction. Finally, adjust the tension and tighten the chain.

What kind of oil should I use with my Ryobi pole saw chain?
It is recommended to use bar and chain oil specifically designed for chainsaws. This oil is thicker and adheres better to the chain, reducing wear and tear.

How often should I sharpen the chain on my Ryobi pole saw?
The frequency of sharpening your chain will depend on the frequency and intensity of use. However, a general rule of thumb is to sharpen the chain every 3-5 uses, or whenever it starts to become dull.

Why is my chain slipping on my Ryobi pole saw?
There are a few possible reasons for a chain slipping. It may be due to a loose chain, a damaged sprocket, or the chain tension being too tight. Check these components and adjust as necessary.

Can I use a different brand of chain on my Ryobi pole saw?
While it is possible to use a different brand of chain, it is recommended to use Ryobi brand chains for best performance and fit.

How can I extend the life of the chain on my Ryobi pole saw?
Regular maintenance, such as cleaning and lubricating the chain, as well as proper storage, can help extend the life of your chain. Additionally, avoiding cutting through hard materials, such as dirt or rocks, can reduce wear and tear.

Show More

Related Articles