How to Replace Chain on Black and Decker Pole Saw: Step-by-Step Guide

If you are the proud owner of a Black and Decker Pole Saw, you know just how mighty this tool can be. It can cut through branches like butter and make your lawn maintenance tasks a lot easier. However, as with any tool, there comes a time when a part needs replacing.

One such part is the chain. Over time, the chain can become dull or damaged, making it less effective in cutting through branches. But fear not, replacing the chain on your Black and Decker Pole Saw is a relatively simple process that you can easily do yourself.

In this blog post, we will guide you through the step-by-step process of replacing the chain on your Black and Decker Pole Saw and have you back to pruning your trees in no time.

Safety Precautions

Replacing the chain on your Black and Decker pole saw can be a safety hazard if you don’t take the necessary precautions. First and foremost, you want to make sure your saw is unplugged from any power source before getting started. Next, ensure that the chain tension is right by following the manufacturer’s instructions.

Putting on gloves can also be helpful to protect your hands from any sharp edges during the process. Once you have the new chain in place, it’s important to ensure that it’s properly lubricated to prevent premature wear and tear. In general, it’s always a good idea to exercise caution when working with power tools such as pole saws, and taking the necessary safety measures can go a long way in preventing accidents.

So, always prioritize safety when replacing the chain on your Black and Decker pole saw.

Before starting the process

Before starting any kind of electrical work, it’s essential to take safety precautions to ensure your own well-being and to avoid causing any damage. Firstly, it’s important to always wear protective gear like gloves and safety glasses when handling electricity to avoid shocks and burns. Make sure that the electricity in your home is properly switched off before starting any repairs or installations.

You can do this by flipping the switch in your main circuit breaker or by unplugging any electrical devices connected to the source you’re working on. Always use tools and equipment that are specially designed for electrical work and make sure all cords and wires are in good condition and not frayed or damaged. Lastly, never try to repair or install anything beyond your expertise – it’s always better to call in a licensed electrician to handle electrical work, especially if you’re unsure about how to proceed.

Taking these safety precautions can go a long way in ensuring that you stay safe during the electrical installation or repair process.

how to replace chain on black and decker pole saw

During the process

Safety Precautions are crucial during any process, be it cooking, driving, or even writing a blog post. When it comes to industrial processes, safety precautions become even more critical. Proper training and education on the use of equipment, machinery, and tools should be a priority.

Personal protective equipment must be provided and worn correctly at all times. This includes eye and ear protection, gloves, hard hats, safety shoes, and respiratory protection if required. Regular inspections of equipment and machinery must also be conducted to ensure they are functioning correctly.

Maintaining cleanliness and organization in the workplace is crucial to prevent accidents and falls. It is also essential to have a clear emergency plan in place, should an accident or incident occur. Safety precautions are not just about following the rules; they are about preventing injury, protecting oneself and others, and ensuring a safe and healthy work environment.

By implementing these safety measures, we can minimize the risks and ensure that everyone returns home safely after a hard day’s work.

Steps to replace the chain

Looking to replace the chain on your Black and Decker pole saw? It may seem like a daunting task, but with the right steps, it can be done quickly and easily. First, make sure to unplug the saw and remove the chain guard. Use a wrench to loosen the nut that holds the bar in place, and slide the bar and chain off the saw.

Next, use a clamp or vise to secure the bar, and use a file or grinder to sharpen the teeth of the new chain. Once your chain is sharp and ready to be installed, thread it onto the bar and around the sprocket, making sure it’s properly aligned and tightened. Finally, place the bar and chain back onto the saw, tightening the nut securely.

With these steps, you can replace the chain on your Black and Decker pole saw and get back to tackling those gardening tasks with ease.

Remove the chain cover

When you want to replace the chain on your motorcycle, one of the first steps you’ll need to take is removing the chain cover. This cover is designed to protect the chain and keep it clean from debris and other elements. To remove it, you’ll need to first locate the bolts that are holding the cover in place.

Most motorcycles have two or three bolts at the bottom of the cover, near the front sprocket. Once you’ve located these bolts, use a socket wrench to remove them carefully. Be sure to keep the bolts in a safe place, so you don’t lose them.

Once the bolts are removed, you should be able to gently pry the chain cover off the sprocket. It may take a little bit of force, but be patient and gentle, so you don’t damage the cover or the sprocket. With the chain cover off, you can begin to inspect the chain and replace it if necessary.

Remember to take your time and follow the manufacturer’s instructions carefully. By following these steps, you can successfully replace the chain on your motorcycle and get back to enjoying your ride.

Loosen the chain tension

When replacing a chain on your bike, it’s important to loosen the chain tension before attempting to remove it. This will make the process much easier. Start by locating the rear derailleur on your bike.

This is the mechanism that moves the chain between gears. Use the barrel adjuster to shift the derailleur to the smallest chainring and cog. This will create slack in the chain.

Next, use a chain tool to remove the old chain from the bike. Be sure to measure the length of the new chain before installing it. Once you have the new chain in place, adjust the tension so that it’s just right.

Too loose and it could fall off, too tight and it could put unnecessary stress on the chain and other components. With these steps, you’ll have a new chain on your bike in no time!

Remove the old chain

To replace a bike chain, one of the first steps is to remove the old chain. This can be done using a few tools, including a chain tool and a pair of pliers. The first step is to shift the bike to its smallest chainring and smallest cassette cog, which will loosen the chain.

Next, find the master link or use the chain tool to separate the chain at any link. Use the pliers or your fingers to pull the master link apart and remove the chain from the bike. It’s important to note that if you plan on reusing the chain, it’s crucial to measure it before removing it to ensure the new chain is the correct length.

Removing the old chain is a key step in the chain replacement process, and once completed, you can move on to installing the new chain.

Install the new chain

Replacing the bike chain is a necessary task that every cyclist must perform periodically to ensure smooth rides. Here are the steps to replace the chain of your bike. Firstly, shift the chain to the smallest cog and the smallest chainring.

Place the chain tool on the chain and remove the pin to detach the old chain. Next, measure the new chain and remove any excess links using the chain tool. Now, install the new chain by threading it onto the cogs and chainrings.

Rejoin the chain by pushing the pin or using a quick link. It is essential to ensure that the chain is neither too tight nor too loose, as it can affect the bike’s performance. Check the chain’s tension and adjust it as necessary.

Finally, lubricate the chain using bike chain lube to ensure that it runs smoothly. By completing these simple steps, you can keep your chain functioning properly, enhance your bike’s performance, and enjoy a comfortable ride.

Tighten the chain tension

If you’re planning to replace your bike’s chain, one essential step is to ensure the chain tension is tight. Loose chain tension can cause the chain to fall off or skip, which can be dangerous while riding. The first step to tightening the chain tension is to locate the adjustment bolts on the rear wheel.

Then, use a wrench or pliers to turn the bolts and move the wheel slightly forward. Make sure to check the chain tension by pulling on the chain to ensure it has a slight slack before tightening the bolts securely. Avoid over-tightening the chain as it can lead to excessive wear and tear.

Finally, test the chain tension again by slightly pushing and pulling the chain to ensure it’s securely in place. Overall, ensuring proper chain tension is crucial in maintaining a smooth and safe ride.

Replace the chain cover

If you’re noticing your chain jumping or skipping gears, it may be time to replace the chain cover. Fortunately, this is a relatively simple DIY fix that can be done with the right tools and a little bit of patience. First, make sure the bike is safely secured in a stand or propped up against a wall.

Then, remove the old chain cover by unscrewing the bolts that hold it in place. Take note of any washers or spacers that may be in place so you can replace them correctly. Then, simply attach the new chain cover by inserting the bolts and tightening them in place.

Make sure the bolts are securely fastened but not too tight as to damage the cover or create unnecessary tension on the chain. With this one simple fix, you can keep your chain running smoothly and ensure a safer, more enjoyable ride.

Testing the new chain

If you’re looking to replace the chain on your Black and Decker pole saw, you’ll be pleased to know it’s a relatively simple process. Before you begin, make sure the saw is unplugged and the chain brake is engaged. Then, use a wrench to remove the bar nut and take off the cover plate.

Next, remove the old chain and replace it with the new one, making sure it’s facing the right way. Finally, adjust the tension by tightening or loosening the adjustment screw before replacing the cover and tightening the bar nut again. With a new chain in place, your pole saw will be ready to take on those tough cutting jobs once more!

Test the saw’s performance

Now that you’ve got your new chain installed, it’s time to test out the saw’s performance. One of the most important things to check is how well the chain is cutting through wood. Start by selecting a log that’s a decent size – not too small, but not so large that it’s tough to cut.

Next, turn on the saw and make sure the chain is properly lubricated. Begin cutting the log at a slight angle and pay attention to how smoothly the saw is running. Is it chattering or vibrating excessively? If so, it could be a sign that the chain is either dull or improperly installed.

Another thing to look for is how quickly the saw is cutting through the wood. Ideally, you want a smooth and consistent cut at a decent pace. Overall, taking the time to test the saw’s performance is a critical step to ensure that it’s running properly and to identify any potential issues that may need to be addressed.


And there you have it, folks! With these simple steps, replacing the chain on your Black and Decker pole saw doesn’t have to be a thorny task. Just make sure to keep safety in mind, use the right tools, and follow the manufacturer’s instructions. Once your saw is back in action, you’ll be pruning and trimming away with ease.

Just be sure to celebrate your handiwork by admiring your tidy trees and rewarding yourself with a refreshing cold drink. Cheers to the power of DIY!”


What tools do I need to replace the chain on my Black and Decker pole saw?
You will need a wrench, screwdriver, and a new chain that fits your specific Black and Decker model.

How often should I replace the chain on my Black and Decker pole saw?
It is recommended to replace the chain every 50 hours of use, or when you notice signs of wear and tear.

Can I sharpen the chain on my Black and Decker pole saw instead of replacing it?
Yes, you can sharpen the chain using a round file to extend its lifespan. However, if the chain is severely damaged, replacement may be necessary.

How do I remove the old chain from my Black and Decker pole saw?
Use a wrench to loosen the nuts that hold the cover plate in place, remove the plate, and then loosen the nuts that hold the chain in place.

How do I install the new chain on my Black and Decker pole saw?
Place the new chain over the drive sprocket, loop it around the bar, and then thread it through the slot in the cover plate. Tighten the nuts that hold the chain in place and then replace the cover plate.

Can I use any type of chain for my Black and Decker pole saw?
No, it is important to use a chain that is specifically designed for your Black and Decker model to ensure proper performance and safety.

How do I adjust the tension on the chain of my Black and Decker pole saw?
Use a screwdriver to adjust the tension screw located on the cover plate until the chain is snug against the bar, but still able to move freely.

Show More

Related Articles