How to Open Arrow Fastener Staple Gun: Step-by-Step Guide for Beginners

Have you ever had a stapler mishap and found yourself struggling to reload your Arrow Fastener staple gun? Don’t fret, as you’re not alone. While staple guns may seem complicated at first glance, once you know how to open them, they’re incredibly easy to use. In this blog post, we’ll show you how to open an Arrow Fastener staple gun step-by-step to make reloading a breeze.

Think of it like opening a jar of peanut butter – once you get the hang of it, it’s a piece of cake. So, grab your staple gun and let’s get started!


If you’re new to using the Arrow Fastener staple gun, you may be wondering how to open it and prepare it for use. Don’t worry, it’s easy! The first step is to make sure the gun is not loaded and that the trigger is in the “off” position. Then, push down on the back end of the loading bay until it pops open.

Next, insert the staples into the bay, making sure they are facing the right direction (usually pointed end down). Once the staples are loaded, simply push the bay closed until it clicks into place. Finally, give the trigger a few test squeezes to ensure the staple gun is functioning properly.

And that’s it! You’re ready to start stapling away. Just remember to always follow proper safety measures when using any kind of tool.

Gather the Required Tools

Before starting any task or project, the first step is always preparation. Gathering all the necessary tools is crucial to ensure a smooth and efficient process. When it comes to a specific project, it’s important to identify the necessary tools for that particular job.

Whether it be a construction project, DIY home renovation, or even just a simple repair, having the right tools is essential. Start by creating a list of all the tools required for the job. This list should include everything from drills, hammers, saws, wrenches, and specific equipment required for a particular job.

Once you have the list, it’s time to gather all the tools. Make sure they are all in good condition, clean, and complete with all their attachments. At times, some tools may need to be rented or purchased new.

Therefore, getting prepared ahead of time will help avoid any unnecessary delays during the project. So, before you start any project, gather all the necessary tools, and have them ready to go.

how to open arrow fastener staple gun

Verify the Staple Gun is Unloaded

When preparing to use a staple gun, it’s essential to verify that it is unloaded. This means there are no staples or nails left in the gun, which could potentially cause harm if accidentally discharged. Start by removing the staple magazine and visually inspecting it to ensure that it is empty.

Then check the magazine’s release mechanism to ensure it’s in the proper position and won’t accidentally release any staples. Once you’ve verified that the staple gun is unloaded, you can move on to loading it with the correct staples or nails for the job. Remember, safety should always come first, so taking a few extra minutes to verify the staple gun’s condition is unloaded is worth it.

Steps to Open the Arrow Fastener Staple Gun

Opening an Arrow Fastener Staple Gun is not as complicated as it may seem. First, ensure that the stapler is unplugged or does not contain any remaining staples. Next, locate the pusher rod release, which is usually located at the back of the stapler.

Push it down and hold it in place while pulling out the pusher rod. Once the pusher rod is removed, the staple magazine should be easily accessible. Pull the magazine out by the handle and load it with the desired staples.

Then, return the magazine to its original position and replace the pusher rod by pushing it back into place until it clicks. Finally, release the pusher rod release, and the Arrow Fastener Staple Gun is ready to use. It is crucial to follow these steps correctly to ensure safe and efficient use of the stapler.

By regularly maintaining and cleaning the staple gun, it will last longer and work more efficiently, saving time and money in the long run.

Step 1: Locate the Latch

Arrow Fastener Staple Gun If you’re having trouble opening your Arrow Fastener Staple Gun, don’t worry! We’ve got you covered. The first step to open your staple gun is to locate the latch. The latch is usually located at the rear end of the staple gun, just above the handle.

You’ll notice a small button or lever that you can push or pull to release the latch. Once you’ve located the latch, push or pull the button or lever to release and unlock it. This will allow you to open up the staple gun and access the staple cartridge or magazine.

With the hatch open, you can now load it with staples or replace the existing staples. Remember to always exercise caution when opening and working with your staple gun to avoid any accidental injuries. With these simple steps, you’ll be able to open and operate your Arrow Fastener Staple Gun with ease.

Step 2: Pull the Latch Towards the Handle

Opening an Arrow Fastener staple gun requires a few simple steps. Once you have located the latch, which is located on the rear of the tool near the handle, you can prepare to open the gun. The first step is to ensure that the gun is not loaded with staples.

You will also need to make sure that the gun is held securely in your hand. To open the staple gun, you will need to pull the latch towards the handle. This can be done with either hand, depending on whether you are left- or right-handed.

You will feel a resistance as you pull the latch, but this is normal. Keep pulling until the latch has fully disengaged from the rest of the tool. Once this has occurred, you can safely open the staple gun and begin to load it with staples.

With a bit of practice, this process should become straightforward and quick, allowing you to get back to your project in no time.

Step 3: Pull the Magazine Out

If you’re new to using an Arrow Fastener staple gun, it can be a bit tricky to figure out how to open it and load staples. But don’t worry – with a little know-how, you’ll be up and running in no time. The first step is to make sure the stapler is empty and unloaded.

Then, locate the release button on the bottom of the gun’s handle and press it down while pulling the staple rail out towards you. Once the rail is fully extended, pull the magazine out gently. Be sure to handle the staple gun carefully at this stage to avoid accidentally releasing any remaining staples.

With the magazine removed, you’re ready to load up a fresh batch of staples and get back to your project. It may take a bit of practice to get the hang of it, but soon enough you’ll be an Arrow Fastener staple gun pro!

Step 4: Load the Staples or Clean the Staple Gun

If you are new to using a staple gun or need a refresher, opening the Arrow Fastener staple gun is an important first step. After ensuring the safety latch is engaged, the next step is to retract the pusher rod by squeezing the handle and pulling back the pusher rod release. This allows you to load the staples or clean the staple gun, making it ready for use.

When loading, make sure to use the correct size and type of staple for the job at hand, and insert them firmly into the magazine. Once loaded, release the pusher rod, and your Arrow Fastener staple gun is ready for action. Remember to always use proper safety precautions while using your staple gun.

By following these simple steps and using caution, you can ensure your staple gun is always ready to tackle any task, big or small.

Safety Precautions

If you’re wondering how to open an Arrow Fastener staple gun safely, there are a few steps you can take to avoid injury. First, make sure the gun is unplugged or the battery is removed. Then, ensure that the magazine is empty by removing any remaining staples.

Next, locate the release button or lever, which is typically found on the rear of the staple gun. Once you’ve located the release button, press it and pull the magazine down and away from the body of the staple gun. It’s essential to be careful during this step as the magazine could snap back and hurt you.

Finally, you can now load the gun with fresh staples, ensuring that they are correctly oriented and that the magazine is securely reattached to the gun’s body. Remember to always wear protective gear when using a staple gun, including goggles and gloves, to minimize the risk of injury. With these simple safety precautions, opening and loading an Arrow Fastener staple gun becomes an easy and safe task.

Keep Fingers Away from Trigger

“gun safety precautions” When it comes to handling firearms, safety should always be a top priority. One of the most important safety precautions to keep in mind is to keep your fingers away from the trigger until you’re ready to shoot. Accidental discharges can happen in the blink of an eye, often as a result of a finger accidentally brushing against the trigger.

By keeping your finger outside of the trigger guard, you can prevent unintended shootings and ensure that you’re in full control of the firearm at all times. This simple yet critical habit is something that should be ingrained in every gun owner and should be followed without exception. Remember, no matter how experienced you are with guns, one moment of carelessness can have devastating consequences.

So, always be mindful of where your fingers are in relation to the trigger and make safety your top priority every time you handle a firearm.

Store Safely When Not in Use

As the saying goes, safety first. And when it comes to storing your belongings, it’s important to take certain precautions to ensure they stay secure when not in use. Whether it’s your power tools, camping equipment, or even just seasonal clothing, all items should be stored in a safe and secure location.

This means keeping them out of reach of children and pets and storing them away from anything that could potentially damage them. If possible, invest in proper storage containers or shelving to keep everything organized and easy to access. And don’t forget to label everything clearly so you know exactly what’s inside each container.

By taking these simple safety precautions, you’ll have peace of mind knowing that your belongings are protected and will be ready for use when you need them.


In conclusion, opening an Arrow fastener staple gun is as easy as shooting staples with it. Simply locate the release button, press and pull back on the loading chamber, insert your staples, and release. Voila! You’re ready to get to work.

So, next time you’re struggling to open your staple gun, just remember to release, insert, and reload. With these simple steps, you’ll be stapling like a pro in no time!”


What is an arrow fastener staple gun and how does it work?
An arrow fastener staple gun is a tool used for fastening staples to materials such as wood and fabric. It works by compressing a spring, which is released when the trigger is pulled, forcing the staple out of the gun and into the material.

Can arrow fastener staple guns be used on different types of materials?
Yes, arrow fastener staple guns can be used on various materials including wood, fabric, and even some metals.

What size staples should I use for my arrow fastener staple gun?
The size of staples you should use for your arrow fastener staple gun will depend on the model of the gun. Refer to the user manual or packaging to determine the correct size.

What is the best way to load staples into an arrow fastener staple gun?
The best way to load staples into an arrow fastener staple gun is by following the instructions provided with the tool. Generally, this involves opening the staple tray, inserting the staples, and then closing the tray.

How do I adjust the depth of staples on my arrow fastener staple gun?
The depth of staples on an arrow fastener staple gun can be adjusted by turning the tool’s depth adjustment dial. This can help ensure that staples are not overdriven or underdriven.

How do I clear a jammed staple in my arrow fastener staple gun?
To clear a jammed staple in an arrow fastener staple gun, first disconnect the tool from the power source. Then, remove any remaining staples and use pliers or a screwdriver to clear the jammed staple.

How do I properly maintain my arrow fastener staple gun?
Proper maintenance of your arrow fastener staple gun involves regularly cleaning the tool, keeping it lubricated, and storing it in a dry and safe place. Refer to the user manual for specific maintenance instructions.

Show More

Related Articles