How to Open a Powershot Staple Gun: Step-by-Step Guide for Beginners

how to open a powershot staple gun

Last Updated on November 7, 2023 by Michael Graw

Are you encountering difficulties in opening your Powershot staple gun? Don’t worry, you’re not alone. For many DIY enthusiasts and professionals alike, staple guns are a handy tool to have around the house or on a job site. But, accessing the interior of the gun can be a bit confounding.

Fret not, as we’ve got you covered. In this blog, we’ll show you how to open a Powershot staple gun step-by-step, and provide you with a few tips and tricks to make the process a breeze. So sit tight, take a deep breath, and let’s get started!

Tools Needed to Open a Powershot Staple Gun

If you’re wondering how to open a Powershot staple gun, there are a few tools you’ll need to get the job done. Firstly, you’ll need a flathead screwdriver – this is essential for removing the staples from the staple gun. Next, you’ll need a pair of pliers to help you grip the staples and pull them out easily.

You’ll also need a Phillips head screwdriver to remove any screws that are holding the staple gun closed. Once you’ve gathered these tools, you can start the process of opening the staple gun. Begin by removing any staples that are already in the gun using the flathead screwdriver and pliers.

Then, use the Phillips head screwdriver to remove any screws that are securing the housing of the staple gun. Once you’ve removed all the screws, you should be able to gently pry open the housing to access the internal mechanisms of the staple gun. With these tools and steps, you should be able to open and maintain your Powershot staple gun with ease.

Phillips head screwdriver

If you’re looking to open a Powershot staple gun, you’ll need a few tools to get the job done. One of the most essential tools is a Phillips head screwdriver, which you’ll use to remove the screws that hold the staple gun together. This type of screwdriver is commonly used in many different types of devices, and its unique shape allows it to grip the head of a Phillips screw better than other types of screwdrivers.

It’s important to make sure that you have the right size of Phillips head screwdriver for your staple gun, as using the wrong size could cause damage to the screws or the gun itself. Once you have the right tools, opening a Powershot staple gun shouldn’t be too difficult. With a bit of patience and some careful work, you’ll be able to disassemble the gun and make any repairs or adjustments you need.

how to open a powershot staple gun

Steps to Open a Powershot Staple Gun

Have you ever struggled with trying to open a Powershot staple gun? It can be a frustrating experience, but luckily, it’s not as complicated as it seems. To start, locate the release button or lever on the back of the staple gun. Press or slide it to unlock the pusher rod.

Next, pull the pusher rod back until it clicks into place. You should now be able to see the staples inside the magazine. If you need to remove or reload the staples, simply pull out the pusher rod and slide the staples in or out.

Once you’re done, slide the pusher rod back in and make sure it clicks into place. Finally, give the staple gun a test squeeze to ensure everything is properly aligned. With these simple steps, you can easily open and reload your Powershot staple gun, making it a quick and painless process.

Step 1: Remove the staple compartment

Are you struggling to open your Powershot staple gun? We’ve got you covered with this step-by-step guide. The first step is to remove the staple compartment, which is located at the back of the gun. You can do this by pressing the release button or lever.

Once you’ve removed the staple compartment, you can access the chamber where the staples are loaded. It’s essential to make sure that there are no staples left inside the gun before proceeding with the next steps. This will help prevent any accidents or malfunctions from occurring.

By following this simple tip, you’ll be on your way to mastering your Powershot staple gun in no time.

Step 2: Remove the screws from the gun’s body

Removing screws from a Powershot staple gun’s body is the next step towards opening it up for maintenance or repair. This process requires a bit of patience and attention to detail to avoid damaging the gun’s internal components. Start by locating the screws on the gun’s body, which may be located on the sides or bottom of the device.

Once you’ve found them, use a screwdriver with the appropriate size to remove them from their sockets. Be sure to keep track of each screw and its location to make reassembly easier. If you encounter any resistance or difficulty removing screws, try applying a gentle amount of force or twisting it slightly while pulling it out.

Remember, the key is to be gentle and steady, so you don’t damage the gun’s internal components. Removing screws from a Powershot staple gun’s body can seem daunting at first, but with a bit of focus and attention, it’s a simple task that anyone can do.

Step 3: Separate the gun’s body

Moving on to step three of opening a Powershot staple gun, you’ll want to separate the gun’s body. This can be a tad tricky, but with a bit of patience, it’s totally doable. Start by locating the two body halves of the staple gun and unlocking the latch that connects them.

You’ll typically find this latch near the front of the gun, on the underside. Once unlocked, you should be able to pull the two halves apart with minimal force. Keep in mind that some staple guns may require a bit more elbow grease than others, so don’t be afraid to use a bit of muscle if necessary.

Just be sure to pull gently, and avoid using tools or excessive force which could potentially damage the gun. Once separated, you should have a clearer view of the gun’s inner workings, which will come in handy if you plan on making any repairs or troubleshooting any issues.

Step 4: Replace staples and reassemble the powershot staple gun

If you’ve followed the first three steps to open a Powershot staple gun, it’s time to replace the staples and reassemble it. To replace the staples, take the correct size of staples and slide them into the staple tray until they click into place. To avoid jams, make sure to use only high-quality staples that are appropriate for your staple gun.

After replacing the staples, it’s crucial to reassemble the staple gun exactly as you took it apart. If you’re unsure of how to put it back together, refer to the manual that came with your staple gun. Once reassembled, test the staple gun by firing a staple into a piece of scrap wood.

If it performs as expected, your Powershot staple gun should be ready to use again in your DIY projects. Remember, proper maintenance of your staple gun is crucial for it to perform optimally and last longer.

Troubleshooting Common Problems

If you’re having trouble opening your Powershot staple gun, don’t worry – it’s a common problem! The most important thing to remember is to make sure the gun is not loaded with staples before attempting to open it. Once you’ve done that, try pushing down on the staple pusher while pulling up on the bottom of the gun. You may need to use a bit of force, but be sure not to use too much or you risk damaging the tool.

Another common issue is with the locking mechanism. If you can’t get the gun to lock into place, make sure the staples are pushed all the way in and the pusher is flush with the magazine. If that doesn’t work, try manually pushing the lock forward while sliding the magazine down.

With a bit of patience and the right technique, you’ll have your Powershot staple gun open and ready for action in no time!

Staples jamming issue in the gun

If you are experiencing a staple jamming issue in your staple gun, don’t panic. This is a common problem that many users face. The first step in troubleshooting this problem is to identify the source of the issue.

One possible cause of a jamming issue is the use of the wrong size or type of staples. Make sure that the staples being used are compatible with your staple gun and are the correct size. Another possibility is that the gun is not loaded correctly.

To avoid this, always make sure that the staples are loaded straight and securely. Finally, if the issue persists, check for any build-up of debris or dust in the gun. Clearing the gun of any debris can often solve the problem.

By identifying the source of the issue and taking the necessary steps, you can easily resolve any staple jamming issue in your gun and get back to work in no time.

Gun cannot shoot staples

When it comes to using a staple gun, it’s important to understand that it can only shoot staples and not bullets. If you’re experiencing issues with your staple gun, there are a few common problems that you may need to troubleshoot. First, make sure you’re using the appropriate size of staples for your gun.

Using the wrong size can cause jamming and misfires. Additionally, make sure your gun is properly loaded with staples and that the spring mechanism is functioning correctly. If your staples are still not firing properly, try adjusting the air pressure or cleaning the gun to remove any debris or obstructions.

Remember, a staple gun is a useful tool for a variety of projects, but it’s important to use it safely and properly to avoid any accidents.


As it turns out, opening a power shot staple gun is not rocket science (unless you’re shooting staples into the moon). With a bit of patience, determination, and a gentle touch, you can unlock the power of your staple gun and unleash your inner handyman or handywoman. Whether you’re fixing up your home or taking on a DIY project, let your powershot staple gun be your trusty sidekick in your quest for crafting glory.


What is a Powershot staple gun?
A Powershot staple gun is a hand-held tool used for fastening materials together using staples.

How do I load staples into a Powershot staple gun?
To load staples into a Powershot staple gun, first, press the latch at the rear of the gun and lift the slide out. Then, insert the staples into the slide, and slide it back into the gun until it clicks into place.

What kind of staples does a Powershot staple gun use?
A Powershot staple gun uses T50 staples, which are commonly available in most hardware stores.

How do I adjust the staple size on a Powershot staple gun?
To adjust the staple size on a Powershot staple gun, first, loosen the screw on the bottom of the gun. Then, move the slide forward or backward to adjust the staple size, and tighten the screw.

Why is my Powershot staple gun jamming?
Your Powershot staple gun may be jamming due to several reasons, including using incorrect staple size, overloading the gun with staples, or dirty or damaged parts. Clean and lubricate the gun regularly, and use it with the recommended staple sizes to avoid jamming.

How do I unjam a Powershot staple gun?
To unjam a Powershot staple gun, first, remove the staples and slide from the gun. Then, use a pair of pliers to remove the jammed staple from the gun’s body. Lubricate the gun, and reload it with the correct staple size.

How do I operate a Powershot staple gun safely?
To operate a Powershot staple gun safely, always wear protective gear, such as safety glasses and gloves. Keep the gun pointed away from yourself and others, and follow the manufacturer’s instructions for loading and using the gun. Store the gun in a secure place out of reach of children.

Rate this post
Scroll to Top