How to Load Brad Nails in Arrow Staple Gun: A Step-by-Step Guide for Quick and Easy Use

As fun as DIY projects can be, they can quickly turn frustrating if you don’t have the proper tools or know how to use them. One tool that many DIY enthusiasts have in their arsenal is a staple gun. However, did you know that staple guns can also shoot brad nails? If you’re scratching your head wondering how to load those tiny nails into your Arrow staple gun, don’t worry! This step-by-step guide will teach you everything you need to know to load brad nails into your Arrow staple gun.

By the end of this article, you’ll be ready to tackle any project that requires brad nails with ease. So, let’s get started!

What You Will Need

If you’re wondering how to load brad nails in your Arrow staple gun, there are a few things you’ll need to get started. First and foremost, you’ll need the right brad nails for your particular model of staple gun. Make sure to check the manufacturer’s instructions or website to ensure you have the correct size and type of brad nails.

Additionally, you’ll want to have a clear and clean workspace, with enough space to maneuver the staple gun and brad nails. It may also be helpful to have a pair of pliers or tweezers on hand, in case you need to remove any nails that get stuck or misaligned during the loading process. With these tools and materials in hand, you’ll be ready to load your Arrow staple gun with brad nails in no time!

Arrow Staple Gun

If you’re looking to take on some home DIY projects, owning an Arrow staple gun can be a game-changer. However, before you get started, there are a few things you’ll need. First and foremost, make sure you have the right kind of staples for your gun.

Arrow produces staple guns that require different types of staples, so it’s important to identify which one is right for you. Additionally, you’ll need a workspace with a strong surface to staple into. This will prevent any damage or injuries from occurring.

You may also want to have a pair of pliers on hand, as they can assist in removing any misplaced staples. Finally, don’t forget to wear appropriate personal protective equipment, like goggles or gloves, to keep your hands and eyes safe from harm. With all of these things in hand, you’ll be well-prepared to tackle any project that comes your way.

how to load brad nails in arrow staple gun

Brad Nails

Brad nails can come in handy when working on woodworking projects, trim work, or even hanging pictures. To get started, you will need a brad nailer, brad nails, and safety gear. The nailer can be electric or pneumatic, and make sure it’s compatible with the size of the brad nails you’ll be using.

Brad nails come in different lengths, so make sure to choose the right size for your project to avoid splitting the wood. Safety gear should include eye protection and a dust mask. Keep in mind that brad nails are not intended for heavy-duty projects, and they work best with softer woods.

With the right tools and safety gear, you can easily add a professional touch to your woodworking project with brad nails.

Selecting the Correct Size of Brad Nail and Arrow Staple Gun

When it comes to using an Arrow staple gun, selecting the correct size of brad nail is crucial. First off, make sure to know the thickness of the material you’ll be nailing into, as that’ll affect the length and gauge of the brad you should use. For thinner materials, a smaller gauge and shorter length brad will suffice, while thicker materials may require a larger gauge and longer brad.

Once you’ve determined the appropriate size, it’s time to load them into the staple gun. To do so, first, make sure the tool is unplugged! Then, slide open the nail loading door, insert the brads with the heads facing down, and push the strip all the way to the back of the chamber. Close the loading door, plug in the tool, and test it out on a scrap piece of material.

Remember to always follow safety precautions, and never aim the tool at yourself or others. With the right size brad and proper loading technique, your Arrow staple gun will be a reliable and efficient tool for your DIY projects.

Check the Arrow Instructions for Nail Sizes

When it comes to using an Arrow staple gun, it’s important to select the correct size of brad nail for the best results. Different sizes of nails can be used for different applications, so it’s essential to check the arrow instructions before starting a project. Choosing the wrong size of nail can cause the gun to jam or even damage the material you’re working with.

For example, if you’re attaching trim to a door frame, you’ll want to use a smaller size nail, about 3/4 inch, to avoid splitting the wood. On the other hand, if you’re building a bookshelf, you’ll need a longer size nail, such as 1 1/2 inches, for added strength. By using the correct size of brad nail, you’ll avoid unnecessary complications and ensure a perfectly finished project.

Use the Nail Gauge to Check the Brad Nail Length

When it comes to selecting the right brad nail and arrow staple gun, there are a few key considerations to keep in mind. One of the most important factors is the length of the nail or staple you plan to use. To ensure proper nail length, you’ll want to use a nail gauge, which allows you to measure the exact size of the brad nail.

This will help you avoid using nails or staples that are too long or too short for your project, which can cause damage or result in a less sturdy finished product. Additionally, it’s important to choose a brad nail and arrow staple gun that can handle the size and thickness of the material you’ll be working with. Be sure to also consider the type of trigger or firing mechanism, as well as any safety features or ergonomic design elements that will make using your tool more comfortable and efficient.

With the right product and careful attention to detail, you’ll be able to make quick work of even the most complex brad nailing and stapling projects.

Loading the Brad Nails into the Arrow Staple Gun

If you’re wondering how to load brad nails into your Arrow staple gun, worry not, because it’s a fairly simple process. First, ensure that you have the correct size brad nails that are compatible with your staple gun. Next, locate the loading mechanism on your staple gun and open it up.

Insert the brad nails, one at a time, into the front channel of the loading mechanism. Make sure that the nails are facing downwards and are flush against the top of the channel. Close the loading mechanism and give it a test fire to ensure that the nails are feeding through properly.

And voila, you’re now ready to start nailing! Remember to always wear eye protection and follow all safety guidelines when using your staple gun.

Open the Magazine Release

loading brad nails Before you begin working with a staple gun, it’s important to understand how to load brad nails into it properly. Firstly, make sure that the staple gun is unplugged. Locate the magazine release button and push it to open the magazine.

This will reveal the loading chamber where you will insert the brad nails. Take a small strip of brad nails and slide it into the chamber, making sure that the heads of the nails are facing outwards. Make sure that the strip sits securely in the magazine.

Once you have loaded the brad nails, test out the staple gun a few times to ensure that it is working correctly. Remember to always wear protective gloves and goggles while using a staple gun, as it can be dangerous if not used properly. By following these simple steps, you can successfully load brad nails into your Arrow staple gun and get to work on your woodworking projects.

Slide the Brad Nail Strip into the Magazine with the Nail Heads Down

Loading the brad nails into the Arrow staple gun can seem like a daunting task, but with a few simple steps, it can be done in no time. The first step is to slide the brad nail strip into the magazine with the nail heads down. Make sure that the strip is flush against the back of the magazine and that the nails are lined up properly.

Once the strip is in place, push it forward until it locks into position. It’s important to note that the Arrow staple gun can only handle one size of nail at a time. So, make sure that the nail strip you are using corresponds to the size of the gun you have.

Also, be sure to consult the manufacturer’s instructions for the proper loading and operation of the tool. With the brad nail strip in place, you’re ready to start using the Arrow staple gun. Simply aim the gun where you want to place the nail and pull the trigger.

The gun will fire the nail into the wood, leaving a small hole that can be easily hidden with putty or a coat of paint. Overall, loading the brad nails into the Arrow staple gun is a simple process that can be completed in no time. With the right technique and attention to detail, you can ensure that your staple gun is always loaded and ready for the job at hand.

So, why not give it a try and see how easy it is?

Push the Brad Nail Strip Forward until it Clicks into Place

Loading the brad nails into the Arrow staple gun might seem like a daunting task, but it’s actually fairly simple. The first step is to locate the brad nail strip, which is a long and thin piece of metal that holds the nails in place. Once you have the strip, you’ll want to insert it into the staple gun, making sure that it’s properly aligned.

Then, push it forward until you hear a satisfying click, which means that it’s locked into place. At this point, you should be able to see the brad nails sticking out of the front of the staple gun. From there, you’re all set to start using it! Just be sure to follow all safety precautions and guidelines, and never point the staple gun at yourself or others.

With a bit of practice, loading the brad nails will become second nature, allowing you to tackle all sorts of DIY projects with ease.

Test Firing the Brad Nails in the Arrow Staple Gun

If you’re wondering how to load brad nails in your Arrow staple gun, the process is quite simple. First, make sure you’re using the correct size and type of brad nails for your gun. Then, locate the loading chamber, which is usually on the bottom or back of the gun.

Slide open the chamber cover, and insert the brad nails in the correct orientation, usually with the triangular tips facing down. Make sure to push the nails all the way in until they click into place. Close the chamber cover, and you’re ready to go.

To test fire the brad nails, aim the gun at a scrap piece of wood and press the trigger. You should see the nails penetrate the wood cleanly and securely. If you experience any issues, such as jamming or misfires, consult your user manual for troubleshooting tips.

With a loaded Arrow staple gun and a steady hand, you can tackle a variety of DIY projects with ease.

Load the Arrow Staple Gun

To load the Arrow staple gun, you will need to begin by unlocking the pusher rod near the bottom of the tool. Once unlocked, slide the pusher rod back until you hear a click. This will allow you to insert your brad nails into the loading chamber.

Make sure to choose the correct size brads for your project before loading them into the gun. Once you have loaded the gun, slide the pusher rod forward until it clicks back into place. You’re now ready to test-fire your brad nails! Press the nose of the staple gun against your desired surface, and firmly squeeze the trigger to release the brad.

With just a bit of practice, you’ll be able to quickly and easily fasten your materials using your Arrow staple gun. So, what are you waiting for? Take aim, load up, and fire away!

Press the Trigger

The Arrow Staple Gun is an essential tool for any DIY enthusiast or professional carpenter. One of its many capabilities is to shoot brad nails into wood with ease and precision. Testing out the trigger on this powerful tool is an exciting experience.

With just a squeeze of the handle, the brad nail shoots out with force, embedding itself securely into the wood. The Arrow Staple Gun’s trigger is designed to give the user complete control, allowing for quick and efficient firing. It’s incredible how something so small can hold so much strength and power.

If you want to tackle a woodworking project, the Arrow Staple Gun is the ideal tool to have in your arsenal.

Inspect the Brad Nail Depth

If you’re looking to get the most out of your Arrow staple gun, it’s critical that you inspect the brad nail depth. Understanding how deep your nails go can help you get a better sense of the kind of holding power your gun will have. To test the firing depth of your brad nails, start by lining up a practice piece of wood.

Load the nail into the gun and press the trigger, driving the brad into the wood. Check the depth of the nail to see if it is flush with the surface or if it needs additional force. If the nail is too shallow, adjust the depth control on your tool until the nail sits flush.

Alternatively, if the nail is too deep, try adjusting the pressure on your tool to avoid damaging the wood. With a little bit of practice and adjustment, you’ll be able to use your Arrow staple gun to quickly and confidently secure your projects.


Now that you know how to properly load brad nails in your Arrow staple gun, you’ll be nailing your DIY projects with ease. Remember, don’t force anything and always make sure to use the appropriate size and type of nail for your project. And always be sure to practice safe nailing – fingers are not nails!”


What size brad nails are compatible with the Arrow staple gun?
The Arrow staple gun is compatible with 18 gauge brad nails ranging from 5/8 inch to 1 1/4 inches in length.

How do I load brad nails into my Arrow staple gun?
To load brad nails into your Arrow staple gun, first unlock the magazine by pressing the release latch. Insert the brad nails into the magazine, making sure they are straight and all facing the same direction. Close the magazine and lock it into place.

Can I use other brands of brad nails with my Arrow staple gun?
It is recommended to only use Arrow brand brad nails with an Arrow staple gun for optimal performance.

Why won’t my Arrow staple gun fire the brad nails?
Check to make sure the nail magazine is properly loaded and locked into place. Also, ensure that the air pressure on your pneumatic gun is set correctly and that there are no jams in the gun.

How do I remove a jammed brad nail from my Arrow staple gun?
Unplug your air compressor and remove any air hoses from your staple gun before attempting to remove a jammed nail. Use a pair of pliers to carefully pull out the jammed nail. If the nail is lodged too deep, disassemble the gun to get better access.

What is the warranty on Arrow staple guns?
Arrow staple guns come with a limited lifetime warranty against defects in material and workmanship.

Can I use my Arrow staple gun for other types of fasteners besides brad nails?
Arrow staple guns are designed specifically for brad nails and should not be used with other types of fasteners.

Show More

Related Articles