How to Load a Stanley Sharpshooter Staple Gun TR45: A Step-by-Step Guide

Looking for a reliable staple gun that can handle heavy-duty projects? The Stanley Sharpshooter Staple Gun TR45 might just be what you need! The TR45 is a high-quality staple gun designed to help you with your DIY projects, home repairs, and general stapling needs. This powerful tool is easy to use, durable, and capable of stapling through thick materials like leather, carpet, and cardboard. In this post, we’ll guide you through the process of loading your TR45 stapler, so you can start using it right away without any hassle or confusion.

With our step-by-step instructions and visual illustrations, you’ll become a pro in no time! So, grab your TR45 staple gun, and let’s get started!

Step 1: Prepare the Gun

Loading a Stanley Sharpshooter TR45 staple gun is an easy task and can be done in a matter of minutes. Before loading the gun, make sure it is unplugged and no staples are present in the magazine. Press down the latch located at the back of the staple gun and pull the magazine out.

Check the staple orientation in the magazine and ensure they are aligned correctly. You can load up to 84 staples in the magazine at a time, depending on the staple size. Once you have loaded the magazine, insert it back into the staple gun until you hear a clicking sound.

Double-check that you have inserted the magazine correctly and that it is securely in place. With this simple step taken care of, the Stanley Sharpshooter TR45 staple gun is ready for use whenever you need it.

Check the staple gun to make sure it is not loaded with staples.

Before using a staple gun, the first thing you should do is check whether it is loaded with staples. This may seem like a no-brainer, but it’s important to ensure your own safety and the safety of those around you. The first step in preparing the gun is to locate the staple chamber.

This can be found either on the top or bottom of the gun, depending on the model. Once you’ve identified the chamber, pull back on the spring-loaded rod to create space for the staples. Carefully insert the staples into the slot in the front of the gun, ensuring none are jammed or misaligned.

With the staples loaded and ready to go, double-check that the staple chamber is secured in place. Finally, test out the staple gun on a scrap piece of material to make sure it is firing properly. By following these simple steps and attending to the small details, you can confidently use your staple gun without worrying about any accidents or mishaps.

how to load a stanley sharpshooter staple gun tr45

Locate the pusher rod at the back of the staple gun and push it all the way in.

When it comes to using a staple gun, the first step is preparing the gun itself. One crucial part of this process is locating the pusher rod, typically found at the back of the staple gun, and pushing it all the way in. This ensures that the staple gun is ready to load and fire staples.

The pusher rod is responsible for pushing the staples through the magazine and into the material being stapled. Without it in the correct position, the gun won’t work properly and could even cause injury to the user. By pushing it all the way in, you can be sure that the pusher rod is snugly in place, ready to do its job.

Once this step is complete, you’ll be ready to load your staples and begin your project with confidence. So take a moment to locate and push in that pusher rod – it may be a small step, but it’s an essential one.

Step 2: Load the Staple Magazine

Loading a staple gun like the Stanley Sharpshooter TR45 can seem intimidating at first, but it’s actually quite simple. To load the staple magazine, first, remove the magazine by pressing the release button and sliding it out of the gun. Then, pull back the magazine cover until it clicks into place.

You should see two rails that run up the side of the magazine. Next, place the staple strip onto the rails, making sure that the legs of the staples line up with the grooves on the rails. Push the staple strip all the way in until you can see the end of the strip peeking out from the front of the magazine.

Once you’ve loaded the staples, slide the magazine back into the gun until it clicks into place. It’s essential to ensure that the staple magazine is securely in place before using the tool to prevent any accidents or malfunctions. With these easy steps, you’ll be able to load the staple gun and tackle your project in no time.

Hold the staple gun with the magazine facing up.

When it comes to loading a staple gun, it’s important to make sure you hold it with the magazine facing up. This specific step is crucial to properly load the staple magazine. Holding it the wrong way can cause the staples to jam or load incorrectly, which can be frustrating and time-consuming.

By holding the staple gun with the magazine facing up, you allow the staples to easily slide into the magazine, allowing for smooth and efficient stapling. Even though it may seem like a small detail, it’s important to take the time to correctly load your staple gun in order to get the best results. So, the next time you go to load your staple gun, remember to hold it with the magazine facing up for hassle-free stapling.

Push the magazine release button located on the bottom of the staple gun to release the magazine.

When loading a staple gun, the first step is to push the magazine release button on the bottom of the gun to release the magazine. This button is typically located right next to the magazine itself, and can be identified by a small symbol of an arrow pointing downward or by the word “release.” Once you push the button, the magazine will slide out easily, allowing you to load it with staples.

Make sure you choose the correct size and type of staple to fit your particular model of staple gun, as using the wrong staples can cause jams and other issues. After loading the staples, simply slide the magazine back into place until it clicks securely into position. With this simple step, your staple gun will be ready for any project you have in mind.

Slide the magazine out and insert the staples.

When it comes to stapling documents together, loading the staple magazine can make all the difference. Step 2 of the process involves sliding the magazine out and inserting the staples. First, locate the staple magazine on your stapler and slide it out of the stapler.

Typically, this will involve pressing a release tab or button. Once the magazine is out, take your staples and load them into the magazine. Most staplers will have a loading tray on the magazine that will hold the staples in place until they are ready to be used.

Make sure to align the staples so that they face the correct direction, usually pointed side down. Once the staples are loaded, carefully slide the magazine back into the stapler until it clicks into place. Now your stapler is ready to use! By following these simple steps, you can ensure that your stapler is loaded and ready to tackle your next document with ease.

Make sure the staples are facing downward.

When it comes to loading a staple gun, it’s essential to make sure the staples are facing downward. This may seem like a small detail, but it can make a huge difference in the overall effectiveness of the tool. If the staples are loaded facing upward, they may not properly embed into the materials you’re stapling or could cause a jam.

To avoid these issues, take the time to check the orientation of your staples before loading them into the magazine. Depending on the type of staple gun you’re using, this process may vary slightly, so be sure to consult the user manual for specific instructions. By taking this extra step to double-check your staple orientation, you can avoid frustrating failures and ensure your stapling projects are smooth and successful.

Step 3: Replace the Magazine

To replace the magazine of a Stanley Sharpshooter TR45 staple gun, you need to follow a few simple steps. Firstly, ensure that the gun is not loaded with any staples by removing them from the chamber. Next, locate the magazine release button at the back of the gun and press it to remove the empty magazine.

Take care to hold the magazine securely to prevent it from falling out. Once you remove the old magazine, insert the new one and push it in until you hear a click. Ensure that the magazine is loaded properly by pulling the follower down and checking that it moves freely.

Finally, test the staple gun by firing a few staples into a test material to confirm that it is functioning correctly. By following these steps, you can easily and safely replace the magazine of your Stanley Sharpshooter TR45 staple gun.

Slide the magazine back into the staple gun until it clicks into place.

Replacing the magazine of your staple gun is a vital part of its maintenance. To do so, you need to follow several steps. First, make sure that your staple gun is disconnected from any power source.

It is crucial for your safety as well as for the smooth functioning of your staple gun. Then, push the button at the bottom of your staple gun and slide the magazine out. Be careful not to drop any staples that might still be inside the magazine.

Once you have removed the magazine, it is time to replace it. To do so, grab a new one and slide it back into the staple gun until it clicks into place. Make sure it is secured tightly in the staple gun.

This final step will ensure that your staple gun is ready to be used the next time you need it. Keeping track of your staple gun’s magazine replacement can help you avoid any mishaps and extend the tool’s lifespan. So, take the time to do it right, and you’ll be back to stapling away in no time.

Step 4: Test the Staple Gun

Now that you’ve loaded your Stanley Sharpshooter staple gun with the appropriate staples, it’s time to test it out! Before you start stapling away, it’s important to make sure that the gun is functioning properly. To test the staple gun, aim it at a scrap piece of wood or cardboard. Squeeze the trigger to release a staple.

Check to make sure that the staple is firmly embedded into the material and that there are no jamming or misfiring issues. If you notice any problems, double-check to ensure that the staples are loaded correctly and that the gun is correctly assembled. Once you’ve confirmed that the staple gun is working correctly, you’re ready to start your project! Just remember to always follow proper safety precautions when using any power tool.

Happy stapling!

Close the staple gun and press the handle to test the staple gun.

Now it’s time to test your staple gun and make sure it’s working properly! Once you have loaded your staples and adjusted the settings to your liking, it’s time to close the staple gun and give it a try. Press the handle down firmly to release the staple and see how it feels. If the staple gun is properly loaded and functioning, you should feel a satisfying click as the staple is released into the material.

If the staple doesn’t come out smoothly or feels weak, double check that your staples are loaded correctly and that the settings are appropriate for the material you are working with. Most staple guns will have an adjustable depth gauge that allows you to customize how deeply the staple is driven into the material. If your staple gun has this feature, be sure to adjust it to the appropriate depth for your project.

Once you have confirmed that your staple gun is working properly, you’re ready to start stapling! Keep in mind that staple guns can be dangerous if not used properly, so always wear appropriate safety gear like gloves and eye protection. With a little practice and attention to detail, you’ll be a stapling pro in no time!


Loading a Stanley Sharpshooter staple gun TR45 is a bit like playing a game of Jenga: you have to carefully remove the existing staples without causing a collapse, then strategically stack in new ones to secure your structure. But don’t worry, with a little patience and a steady hand, you’ll be stapling like a boss in no time. And who knows, maybe you’ll even pick up a few tips for your next family game night.


What type of staples should be used with the Stanley Sharpshooter TR45 stapler?
The Stanley Sharpshooter TR45 should be used with Stanley Sharpshooter TRA700 series or Arrow T-50 heavy duty staples.

How do I load staples into the Stanley Sharpshooter TR45 stapler?
To load staples into the TR45 stapler, press the latch on the back of the stapler and pull the slide out. Insert the staples into the chamber, then slide the mechanism back into the stapler until it clicks into place.

Can the Stanley Sharpshooter TR45 staple gun be used on hard materials like wood or metal?
Yes, the TR45 stapler is designed to handle heavy-duty stapling tasks, including stapling into hard materials like wood or metal.

How do I know when it’s time to reload staples in my Stanley Sharpshooter TR45 stapler?
When the stapler stops firing staples or the staples become difficult to push through material, it’s time to reload the staples.

Can I adjust the staple depth on my Stanley Sharpshooter TR45 stapler?
Yes, the TR45 stapler has an adjustable staple depth feature that can be adjusted with a simple twist of the knob at the front of the stapler.

Is the Stanley Sharpshooter TR45 stapler suitable for home use, or is it a commercial-grade tool?
The TR45 stapler is designed for both home and professional use and can handle a variety of stapling tasks.

Can the Stanley Sharpshooter TR45 stapler be used to staple upholstery or fabric?
Yes, the TR45 stapler can be used to staple upholstery or fabric, but it’s important to select the right size staples for the job and use a light touch to avoid damaging the material.

Show More

Related Articles