How to Repair Arrow Staple Gun: A Step-by-Step Guide for Troubleshooting and Fixes

how to repair arrow staple gun

Do you have an Arrow staple gun that’s broken or not working properly? Don’t worry, you’re not alone. Many people face this issue and it can be very frustrating when you have work to do. But don’t panic, there are ways you can repair it yourself and avoid the cost of getting it fixed by a professional.

In this blog post, we will guide you through the steps of repairing your Arrow staple gun. From identifying the problem to finding the right replacement parts, we’ll cover everything you need to know to get your staple gun back in working order. Staple guns are an essential tool in many households and workplaces.

They’re used for countless projects, including furniture upholstery, craft work, carpeting, and more. But when they’re not working properly, they can be a real headache. Fear not, by following the steps we have outlined, your Arrow staple gun can be up and running again in no time.

So, let’s get started and learn how to repair your Arrow staple gun together.

Identifying the Problem

If you’re looking to repair your arrow staple gun, the first step is to identify the problem. Common issues that can arise with staple guns include jammed staples, misfires, and difficulty loading the staples. Before attempting any repairs, make sure to consult your staple gun’s manual to determine the best course of action.

It’s important to use caution when working with staple guns, as they can be dangerous when not used properly. If you’re unsure about how to approach a repair, it’s always best to seek out professional assistance. With the right tools and expertise, repairing your arrow staple gun can be a simple and straightforward process.

Remember to take your time, follow the instructions carefully, and prioritize safety at all times.

Staples not coming out

Have you ever experienced the frustration of trying to staple a document, only to find that the staples aren’t coming out? This is a common issue that can be caused by a number of factors. One of the most common causes is a jammed staple. This can occur when a staple gets caught in the stapler mechanism, preventing the next staple from coming out.

Another possible culprit is a dull staple, which can be caused by repeatedly stapling through too many pages or using a low-quality staple. In some cases, the problem may be with the stapler itself, such as a misaligned driver blade or a worn out spring. Identifying the problem is key to finding a solution, so if you’re experiencing this issue, take a closer look at your stapler and the staples you’re using.

how to repair arrow staple gun


Jamming is a common problem that many musicians face during their performance. It can be frustrating when the sound suddenly cuts out or becomes distorted. The key to solving this problem is to identify the source of the jamming.

This could be caused by a variety of factors: faulty cables, damaged equipment, or even interference from other electronic devices. It’s important to troubleshoot each potential cause until the root of the problem is found and resolved. Sometimes, jamming can also be caused by the musician themselves – playing too aggressively or not tuning their instrument properly.

By taking the time to identify and solve the source of the jamming, musicians can ensure a smooth and enjoyable performance for themselves and their audience.

Bent staples

If you’ve ever encountered bent staples in your stapler, you may wonder why it’s happening. This can be a frustrating issue, especially if you need documents stapled promptly. Thankfully, identifying the problem is straightforward.

First, check if your stapler is jammed, as this can lead to bent staples. Secondly, ensure that you’re using the correct size staples for your stapler. Using larger staples than recommended can cause them to bend.

Additionally, check the paper quality you’re stapling. Thicker paper can also cause bent staples. By identifying the problem, you can avoid further mishaps, and ensure that your stapling is seamless.

Disassembling Your Arrow Staple Gun

If you’re having trouble with your Arrow staple gun, it may be time to disassemble it and take a closer look. So, how to repair Arrow staple gun? The first step is to unplug the stapler and ensure that it’s not loaded with any staples. Then, remove the staples from the magazine and use a flathead screwdriver to pry it from the body of the stapler.

Next, remove the screws that hold the stapler’s cover in place. You can now access the internal components of the stapler, including the spring and trigger mechanism. Inspect all parts for damage or wear and replace any that are broken or excessively worn.

Once you’ve made any necessary repairs or replacements, reassemble the stapler in the reverse order that you took it apart. Remember to load the stapler with fresh staples before testing it out. By following these instructions, you can keep your Arrow staple gun in top condition and avoid the need for costly repairs or replacements in the future.

Removing staples and residual tension

If you’re looking to disassemble your Arrow staple gun, you need to start by removing the staples and any residual tension. This might seem daunting if you’re not used to messing with tools, but it’s actually quite simple. First, you’ll need to find where the staples are stored and remove them.

Depending on the model, this might be located on the bottom of the gun or on the front. Once you’ve removed the staples, carefully inspect the gun for any residual tension. You might notice that the handle is still compressed or that the spring is still wound up.

If this is the case, you’ll need to release the tension before you can safely take the gun apart. To do this, check the manufacturer’s instructions or look for a release button on the gun. Once the tension is released, you can go ahead and take the gun apart.

Remember to always be careful when dealing with tools and to put safety first!

Removing the staple gun housing

If you’re interested in disassembling your Arrow staple gun, the first step will be to remove the staple gun housing. This can seem a bit daunting at first, but it’s actually quite simple. Start by locating the two screws on the back of the staple gun and removing them.

Once the screws are out, carefully take off the housing. You may need to apply a bit of pressure to get it to come off, but be gentle to avoid damaging any of the inner workings. With the housing off, you’ll be able to access the internal parts of the staple gun and begin replacing any components that need it.

By following these steps, you can disassemble and troubleshoot your Arrow staple gun with ease.

Repairing Your Arrow Staple Gun

If you own an Arrow staple gun and it’s not working, don’t worry – there are a few things you can do to repair it. First, make sure that the staple gun is unplugged or the batteries are removed before you start inspecting it. Then, check to see if there are any staples stuck in the gun.

If there are, carefully remove them using a pair of pliers. Next, check the spring that powers the staple gun – if it’s damaged or worn out, it will need to be replaced. You can find replacement springs online or at your local hardware store.

Another issue that can cause a staple gun to malfunction is a clogged or dirty magazine. Remove any staples from the gun and use a small brush or compressed air to clean out the magazine. Lastly, if none of these solutions work, it may be time to replace the staple gun altogether.

With a bit of maintenance and care, your Arrow staple gun should last for years to come.

Replacing worn parts

If you’re finding that your arrow staple gun isn’t working as well as it used to, there’s a good chance that some parts are worn or damaged. Fortunately, with a bit of knowledge and some basic tools, you can easily replace these parts and get your staple gun working like new again. The first step is to identify which parts are worn or damaged.

Common culprits include the spring, the hammer, and the magazine assembly. Once you know which part(s) to replace, you can order a replacement online or from a hardware store. Then, all you need to do is remove the old part and install the new one according to the manufacturer’s instructions.

With just a little bit of effort, you’ll be able to extend the life of your arrow staple gun and get the job done quickly and efficiently.

Cleaning and lubricating the stapler

Cleaning and lubricating your Arrow staple gun is an essential part of maintaining its longevity. Over time, dirt and debris can build up in the mechanism, which can cause it to jam or malfunction. To avoid this, regular cleaning is necessary.

You can start by disassembling the gun by removing the staples and then setting the release catch. This will allow you to remove the staple carrier and clear any debris inside. Once done, use a cloth to wipe down the parts and then apply a lubricant to the metal components.

Always use the right type of oil to ensure smooth operation. Remember, a well-maintained staple gun will work efficiently and accurately, making your DIY projects a breeze. By keeping it clean and lubricated, you’re ensuring it will stay in top condition for years to come.

Reassembling Your Arrow Staple Gun

If you need to repair your Arrow staple gun, one of the most important steps is reassembling the tool. This process can be a bit tricky, so it’s important to pay close attention to the instructions. First, make sure all of the parts and pieces are clean and free of debris.

Then, carefully align the driver with the staples, taking care not to damage the driver blade. Next, insert the spring into the tool housing and attach it to the driver blade. Finally, reattach the tool cover and test the tool to ensure it’s working properly.

By following these steps, you can successfully reassemble your Arrow staple gun and have it functioning like new in no time.

Putting the housing back together

If you’ve taken your Arrow staple gun apart, it’s time to put it back together. Reassembling your staple gun can seem daunting, but it’s actually easier than you think. Start by aligning the two halves of the housing, making sure they’re flush and aligned.

Then, insert the trigger into the housing, fit the spring that goes between the trigger and the staple pusher, and install the pusher itself. Once this is done, slide the magazine rack into the housing, and you’re ready to attach the release button. Finally, you’ll need to get the handle back into place and attach the locking plate.

With these steps completed, your Arrow staple gun is ready to go! By taking your time and following these steps carefully, you can easily reassemble your stapler and resume your projects in no time.

Reinserting staples and tensioning spring

When it comes to reassembling an Arrow staple gun, one of the essential steps is reinserting the staples and tensioning the spring. After opening up the stapler and replacing any damaged parts or cleaning it out, it’s time to get started on this crucial process. First, load in a fresh strip of staples, making sure they are inserted correctly and facing the right way.

Then, carefully reattach the metal plate that covers the staple chamber, ensuring that the spring fits snugly in its designated slot. With that done, it’s time to tension the spring by compressing it and placing the tensioning rod back in place. This is a vital step in making sure the staple gun functions correctly and gives the proper amount of force needed to drive staples into whatever material you’re working with.

With the staples loaded and the spring properly tensioned, your Arrow staple gun is almost ready to go. Double-check all the parts and make sure everything’s in place, and you’re ready to start stapling.

Testing Your Repaired Arrow Staple Gun

If you’ve recently repaired your Arrow staple gun, you’ll want to test it out to ensure it’s functioning correctly before using it for any important projects. Begin by loading the staple gun with a fresh set of staples and then find a scrap piece of wood or cardboard to test it on. Make sure the staple gun is fully engaged and compressed so that it will release the staples properly.

Then, with the staple gun pointed squarely at your test material, firmly press the trigger to release a staple. If the staple fully and cleanly penetrates the material without any jams or misfires, then your repair job was successful. If you encounter any issues, such as misfires or staples not penetrating the material fully, then you may need to take a closer look at your repair job to see if any adjustments need to be made.

Overall, testing your repaired Arrow staple gun is a necessary step to ensure that it’s functioning properly and will help prevent any costly mistakes down the road.


Congratulations! By following the steps in this guide, you have successfully repaired your arrow staple gun and avoided the hassle and expense of buying a new one. Now you can rest easy knowing that you can tackle any future projects with your trusty, fully-functioning staple gun. Remember, a little bit of maintenance goes a long way in ensuring the longevity of your tools.

So, keep those staples flying and happy DIY-ing!”


What are some common issues with the Arrow staple gun that require repair?
Some common issues that require repair include jammed staples, misfiring, and difficulty loading new staples.

How do I clear a jammed staple from my Arrow staple gun?
First, unplug the staple gun and remove any remaining staples. Use pliers or a needle-nose tool to gently remove the jammed staple.

Can I repair a misfiring Arrow staple gun on my own?
It depends on the cause of the misfire. If it is due to a worn driver or piston, it may require professional repair. However, if it is due to a dirty or clogged staple supply, it can often be resolved with a simple cleaning.

What should I do if my Arrow staple gun is not shooting staples at all?
Check to make sure the staple gun is properly loaded with the correct type and size of staples. Also, make sure the trigger is being pulled all the way back.

How often should I oil my Arrow staple gun?
It is recommended to oil your staple gun after every 500 shots.

Can I use non-Arrow staples in my Arrow staple gun?
It is recommended to only use Arrow staples in an Arrow staple gun to ensure proper performance and avoid damage to the tool.

Where can I find replacement parts for my Arrow staple gun?
Replacement parts can be found on the Arrow website or through authorized Arrow dealers.

Rate this post
Scroll to Top