How to Lower Car Jack Stands Safely and Effortlessly

If you’re a regular car owner who likes to tinker with their vehicle, you’re probably familiar with the ubiquitous car jack stands. These equipment are essential to lift your car off the ground, while you work on it and ensure that you’re safe from any accidents. One crucial step when using car jack stands is lowering them.

It may seem like a straightforward task, but it’s important to do it correctly to avoid any mishaps. If you’re unsure of how to safely lower your car jack stands, don’t fret! In this article, we’ll provide you with a step-by-step guide that will help you lower your car jack stands like a pro.

Choosing the Right Position

When it comes to lowering car jack stands, choosing the right position is crucial for both safety and efficiency. First and foremost, find a level surface to park your car on, away from any potential hazards. Once you’ve located a suitable spot, engage the parking brake and begin to lower the car jack.

It’s important to note that the weight of the vehicle should never be fully supported by the jack alone. Instead, place the jack stands under the designated manufacturer’s spots, usually found along the vehicle’s frame or axle. Slowly release the jack, allowing the weight of the car to evenly distribute onto the jack stands.

Make sure the vehicle is fully supported before getting underneath it and always double-check that the car jack stands are secure before attempting any repairs. By taking these precautions and choosing the correct position for your vehicle, you can safely and efficiently lower your car jack stands.

Inspect the area before lowering the car jack stands

Inspecting the area before lowering the car jack stands is an essential step to ensure your safety and prevent any accidents. It’s crucial to choose the right position to avoid any potential risks. You need to check the ground where you’re going to place the jack stands.

It should be level, firm, and capable of supporting the weight of your vehicle. Avoid placing them on soft, uneven, or sloped surfaces as they’re prone to sinking, tipping, or shifting. Additionally, watch out for any obstacles or debris that may interfere with the placement of the jack stands or damage your vehicle.

Always make sure there’s enough space for you to move and work underneath your car without getting stuck or injured. By taking these precautions, you can be sure that you’re lowering your car onto a safe and secure platform, reducing the likelihood of accidents or injuries. Remember, safety first!

how to lower car jack stands

Look for level ground

When setting up a camping tent, it’s essential to look for level ground. Choosing the right position can make a huge difference in not only how comfortable you are but also how well you sleep. Sleeping on uneven ground can cause a lot of discomfort and also affect your body’s alignment, leading to aches and pains.

So, it’s vital to search for a flat and even surface to pitch your tent. Ideally, you should try to find a spot that’s free from rocks, roots, and other sharp objects that can make sleeping uncomfortable. Additionally, you want to avoid setting up your tent in low-lying areas because these spots are more likely to accumulate water if it rains, making your tent susceptible to flooding.

A good rule of thumb is to gently run your hands over the ground to feel if there are any bumps or depressions. Once you’ve found the perfect spot, you can set up your camping tent with peace of mind, knowing that you’ll have a comfortable and enjoyable night’s sleep.

Ensure the jack stand positioning matches your car manual

When it comes to lifting your car with a jack stand, it’s crucial to choose the right position for both your safety and the health of your vehicle. Your car manual is an essential tool to help you identify where to place your jack stand. Depending on your car’s make and model, the recommended positions can vary.

Most vehicles have designated jack points located underneath the chassis or around the wheel arches. These points are designed to support the weight of your car and ensure stability while you work on it. Failing to place your jack stand correctly can result in serious injuries or even damage to your car’s structural integrity, leading to costly repairs.

Therefore, it’s essential to take your time and carefully study your car manual to identify the right jack stand position. By doing so, you can work safely and effectively on your car without worrying about any unfortunate accidents or complications.

Preparing to Lower

When it comes to lowering your car off of jack stands, there are a few steps you should follow to ensure everything goes smoothly. First and foremost, make sure you have a level, stable surface to work on and that your vehicle is securely in park and the emergency brake is engaged. Then, using a floor jack or hydraulic jack, slowly lower the vehicle until it rests on the jack stands.

Make sure the jack stands are properly positioned under the vehicle, using the manufacturer’s recommended points for placement. Once the weight of the vehicle is on the jack stands, give the vehicle a gentle push to ensure that it is properly seated. Only then can you begin to remove the jack and complete your repairs or maintenance.

Always remember to exercise caution and never work underneath a vehicle that is not securely lifted and supported by properly positioned jack stands. By following these steps, you can confidently and safely lower your car off of jack stands without any issues.

Ensure the release valve is closed tightly

When preparing to lower something with a hydraulic jack, it’s important to ensure that the release valve is closed tightly. This valve controls the flow of hydraulic fluid, and if it’s open, the item being lowered will drop suddenly and could cause serious injury or damage. To avoid this risk, first, make sure the item is properly positioned on the jack and that the jack is stable on a level surface.

Then, double-check that the release valve is completely closed by turning it clockwise until it won’t turn any further. It’s always better to take a few extra seconds to confirm that everything is secure before starting lowering, than to risk an accident. So, take your time and follow the safety precautions to ensure a safe and smooth process.

Use a quality hydraulic jack

When it comes to lowering your vehicle, preparation is key. Before you lower your car, truck, or SUV with a hydraulic jack, it’s important to make sure the jack is in good working order. A quality hydraulic jack will ensure a safe and smooth lowering process.

Before you begin, you should inspect the jack to make sure it’s clean and free of debris that could cause it to slip or become unstable. You should also check its weight capacity to ensure it can handle the weight of your vehicle. Once you’ve inspected the jack and made sure it’s ready to go, position it under the appropriate lifting point on your vehicle.

It’s important to follow the manufacturer’s instructions for proper placement. With your vehicle securely positioned on the jack, you can begin to slowly lower it to the desired height. Remember to always exercise caution and never rush the process.

By taking the time to properly prepare your hydraulic jack and follow these steps, you can safely and effectively lower your vehicle to achieve the look and performance you desire.

Remove weight from car jack stand

When it’s time to lower your car from jack stands, it’s important to take the proper steps to ensure your safety. The first step is to remove any weight from the stands. This can be done by gradually lowering the vehicle onto the ground, but be sure to keep a hand on the vehicle to steady it as it comes down.

Once the weight is off the stands, use one hand to hold onto the car while using the other to release each stand. Slowly lower the stand to the ground, being careful not to trap your fingers or toes. Remember to always use caution and follow the manufacturer’s instructions when working with car jack stands to ensure a safe and successful outcome.

By taking these precautions and following these simple steps, you can avoid potential accidents and safely lower your vehicle.

Lowering the Car Jack Stands

Lowering car jack stands is a crucial step in safely returning your vehicle to the ground after working under it. Start by positioning yourself neatly beside the car and placing the hydraulic jack handle where you can easily reach it. Then, insert it into the valve and pump it up until the vehicle lifts off the ground.

Next, put the jack stands in the designated spots and carefully lower the vehicle onto them, ensuring that they are securely in place. To lower the car off the stands, start by standing to the side of the vehicle and using the jack handle to carefully open the valve. The vehicle will slowly lower back to the ground.

Remove the jack stands and place them back where you found them. This is how to lower car jack stands safely and effectively. Remember to be cautious at all times and maintain control of the vehicle at all times.

Release the pressure of the jack

Once you’ve finished working on your car and it’s time to lower the jack stands, make sure you follow the proper steps to ensure a safe and smooth process. Start by locating the release valve and turning it counterclockwise to release the pressure on the jack. This will allow the car to slowly lower onto the stands.

Keep your hand on the car to feel for any sudden movements and make any necessary adjustments. Once the car is fully resting on the stands, give it a gentle shake to ensure it’s stable and secure. It’s crucial to make sure the car is properly supported on the stands before crawling underneath it.

Remember, safety always comes first, and taking the time to lower the jack stands correctly could prevent a serious accident.

Slowly turn the release valve

Lowering car jack stands can be a crucial step in the process of vehicle maintenance or repair, and it’s essential to do it correctly to prevent any accidents or damage. To safely lower a car on its jack stands, slowly turn the release valve on the hydraulic jack and lower each stand methodically. Do not try to quickly remove the stands as doing so can cause the car to become unstable or fall off the stands, causing serious injury or damage to your vehicle.

It’s also important to note that you should never crawl under a vehicle supported by jack stands until you’ve double-checked that the stands are securely in place and carefully lowered the car to the ground. Remember, always prioritize safety measures to avoid any unfortunate incidents.

Count the turns as you lower the jack stand

When it comes to using car jack stands, safety should always be your top priority. One essential thing to remember while lowering a jack stand is to count the turns. Counting the turns means that you can keep track of how much the jack stand is lowering, enabling you to stop at the appropriate level.

Lowering the jack stand at the incorrect level can make the car unstable, resulting in a hazardous environment. Forgetting to count can also lead to a sudden drop in the car, which can be incredibly dangerous. By counting the turns, you can ensure that the jack stand is lowered evenly and safely, making it easier to work on your vehicle without fearing for your safety.

So, the next time you’re lowering your car onto a jack stand, don’t forget to count the turns and maintain a safe working environment.

Check if the jack stand is fully lowered before pulling it out

Lowering Car Jack Stands If you are using car jack stands to lift your vehicle, it is essential to know how to lower them safely. Before you start, make sure the vehicle is on level ground and the parking brake is engaged. Begin by removing the wheel chocks, if any, and then locate the release lever of the jack stand.

Gently pull the lever, and the jack stand should start to lower. As you lower the jack stand, make sure to keep an eye on the vehicle and ensure it remains balanced. If the vehicle starts to shift or wobble, stop the lowering process and readjust the jack stand as needed.

It is important to remain patient and take your time when lowering the jack stand to prevent any accidents or injuries. One essential step that many people forget is to check if the jack stand is fully lowered before pulling it out. Double-check the height of the jack stand to ensure it is not supporting any weight before removing it.

Attempting to remove a jack stand that is still supporting weight is extremely dangerous and can result in serious injury or even death. In summary, lowering car jack stands requires caution, patience, and attention to detail. Always double-check the vehicle’s balance, take your time, and ensure the jack stand is fully lowered before removing it.

By following these safety measures, you can lower your car jack stands with confidence and avoid any unnecessary accidents or harm.

Final Thoughts

Lowering car jack stands can be a bit daunting, especially if you’re new to working on cars. But, it’s an important skill to have if you want to safely work under your vehicle. The first step is to make sure the car is securely in place on the jack stands.

Once you’re ready to lower, locate the release mechanism on the jack stands and slowly turn it counterclockwise. Make sure to only lower one stand at a time and keep an eye on the car to ensure it remains stable. Once both stands have been safely lowered, you can remove them from underneath the car.

Following these steps will ensure your safety and the safety of your vehicle while working underneath it.

Safety precautions to remember before lowering the car jack stands

When it comes to lowering your car off of the jack stands, it’s important to remember a few safety precautions to ensure that you and your car stay safe. First and foremost, make sure that you’ve chocked the wheels and your car is on a flat, level surface. This will prevent any unexpected movements from the car while it’s being lowered.

Another important precaution to take is to slowly and steadily lower the car. Don’t rush the process or try to lower it too quickly, as this can cause the car to shift or fall off of the jack stands. Finally, always double-check that the car is securely on the ground before removing the jack stands completely.

This will ensure that the car won’t tip over or roll away once the jack stands are removed. Remembering these simple safety precautions will help you safely lower your car off of the jack stands without any mishaps.

Lowering car jack stands should never be rushed

Lowering car jack stands should never be rushed, as it can cause serious harm and damage. When using a jack stand, it’s important to make sure it’s on a stable and flat surface, and that the weight of the vehicle is evenly distributed. Once you’re ready to lower the car, always do it slowly and steadily, making sure to keep your hands and feet clear of the area.

Rushing this process can cause the car to become unstable and potentially fall off the stands, which can result in serious injury or even death. Taking your time and being careful is always the best approach when it comes to handling a heavy and potentially dangerous piece of equipment like a car jack stand. Trust us, it’s always better to be safe than sorry.


In conclusion, lowering car jack stands is not rocket science, but it does require some attention and know-how. As with anything automotive, safety needs to come first and foremost. Make sure you are using the right tools for the job, and never rush the process.

Remember, a stable and secure foundation can make all the difference when you’re working under a vehicle. And if you find yourself struggling to get those jack stands to budge, just remind them that gravity always wins.”


What is the proper way to lower car jack stands?
To lower car jack stands, slowly turn the release valve counterclockwise until the stand is fully lowered to the ground.

Can you use car jack stands on an uneven surface?
No, car jack stands should only be used on a flat and level surface to ensure stability and safety.

How do you properly position jack stands under a car?
Jack stands should be placed under the manufacturer-recommended jacking points on the car, and double-checked for stability before use.

What weight capacity jack stands do I need for my car?
It is important to check your car’s weight and find jack stands with a weight capacity that exceeds that amount to ensure safety during use.

How often should I inspect my jack stands for wear and tear?
It is recommended to inspect jack stands before each use for any cracks, corrosion, or other signs of damage that could compromise their safety and effectiveness.

Can I use car ramps instead of jack stands?
Car ramps can be a suitable alternative to jack stands for certain tasks, but they should not be used for any work that requires the wheels to be lifted off the ground.

Is it safe to work alone with jack stands?
While it is possible to work alone with jack stands, having a helper on hand can provide an extra measure of safety and security during the process.

Show More

Related Articles