How to Load Arrow Fastener Staple Gun: A Comprehensive Guide

Are you struggling with your staple gun and not sure how to load it properly? Look no further, because we’ve got you covered. The Arrow Fastener staple gun is a fantastic tool for all your stapling needs, but if you’re not sure how to load it, it can be frustrating and time-consuming. In this blog, we’ll provide you with a step-by-step guide on how to load your Arrow Fastener staple gun quickly and efficiently, so you can get back to your project in no time.

From the basics of staple loading to detailed instructions, we’ll cover everything you need to know to make your stapling experience a breeze. So, let’s get started and learn how to load your Arrow Fastener staple gun like a pro!

Gather Your Materials

Loading an Arrow Fastener staple gun requires a few materials before you can get started. First, you will need the staple gun itself, along with the correct size staples for your project. Make sure to check the packaging for the recommended staple size to avoid any issues with jamming or misfires.

You will also need a flat surface to work on and potentially a pair of pliers or scissors to help remove any jammed staples from the gun. Taking the time to gather all of these materials before loading your staple gun will ensure a smoother and more efficient process overall. Now that you have all of your materials, it’s time to move on to the actual loading process and start tackling your project.

Heading Three

Heading Three: Gather Your Materials Before beginning any project, it’s important to gather all the necessary materials. This ensures that you’ll have everything you need for the task at hand and can complete the project efficiently. For example, if you’re planning to paint a room, you’ll need to gather all the paint, brushes, and any other supplies you’ll need before starting.

The same applies to DIY home improvement projects. Before starting a renovation, make sure you have all the necessary tools and materials, like nails, screws, and lumber. If you’re unsure what you’ll need for a specific project, do your research beforehand and make a list of everything you’ll need to purchase.

This will help you avoid unnecessary trips to the hardware store and wasted time. Overall, gathering your materials before starting any project is a crucial step that will set you up for success.

how to load arrow fastener staple gun

Heading Three

Gathering your materials is the first step towards any successful project, and it’s especially important when it comes to DIY projects. Before you get started, you’ll want to make sure you have everything you need on hand. This will not only save you time in the long run, but it’ll also ensure that you don’t have to make multiple trips to the store or interrupt your momentum.

Start by identifying the tools and supplies you’ll need for the project. Depending on the complexity of the project, you may need a wide range of tools, from basic screwdrivers and hammers to more specialized equipment like saws and sanders. Don’t forget to take into account any safety equipment you’ll need, such as goggles, gloves, or masks.

When it comes to supplies, it’s always a good idea to buy a little extra than what you think you’ll need, just in case. That way, you won’t have to make a last-minute run to the store if you run out of something. By taking the time to gather your materials beforehand, you’ll be well-equipped to tackle any DIY project that comes your way.

Unlock the Magazine

If you’re wondering how to load your Arrow Fastener staple gun, don’t worry, it’s easier than you think! First, make sure your staple gun is unplugged and the safety lock is on. Next, locate the magazine release button, typically found at the rear of the gun. Push the button to release the magazine from the gun.

You’ll notice the magazine has a rail system on the bottom where the staples will be loaded. Carefully insert the staples into the rail, making sure they are facing in the right direction. After loading the staples, slide the magazine back into place until you hear a click.

Your Arrow Fastener staple gun is now loaded and ready to use! It may take a few trial runs to perfect your technique, but once you get the hang of it, you’ll be stapling like a pro in no time.

Pull Down the Magazine Release

Unlocking the magazine from your gun is an essential step before disassembling it. To do this, you need to pull down the magazine release, which is usually located on the side of the gun. You can do this with your thumb or trigger finger, depending on the gun’s size and your hand’s grip.

It would be best if you exerted enough pressure to release the magazine from its slot. Once you hear or feel a clicking sound, you can pull the magazine out without any difficulty. It’s crucial to be careful when pulling the magazine out to avoid accidentally pressing the trigger.

With this simple step, you can now proceed to dismantle your gun, clean its components, and maintain it in good working condition. Remember, always follow safety protocols when handling firearms, and keep them out of reach from children or unauthorized personnel.

Open the Magazine

“Open the Magazine” Are you tired of being restricted with online articles that only give you a glimpse of the full story? Then it’s time to unlock the magazine! Magazines provide in-depth and detailed reporting on a variety of topics. By opening up the pages, you open up your mind to new perspectives and ideas. With topics ranging from lifestyle, business, culture, and politics, magazines can broaden your understanding of the world around you.

Plus, magazines offer a wide range of content – from interviews with industry leaders to long-form investigative reports. Unlocking the magazine means you’ll have access to a diverse range of stories and insights that will keep you engaged and informed. So what are you waiting for? Open up the magazine and see what amazing and thought-provoking content awaits you.

Load the Staples

When it comes to loading staples into your staple gun, the first step is to unlock the magazine. This may seem like a daunting task, but it’s actually quite simple. Take a look at your staple gun and locate the magazine release button.

This button will either be on the side of the staple gun or near the front. Press down on the button and hold it there. Next, pull the magazine out of the staple gun.

This will give you access to the staple compartment. To load the staples, simply insert them into the compartment with the pointed end facing out. Once the compartment is full, slide the magazine back into the staple gun until you hear a click.

This indicates that the magazine is securely in place and ready to go. With the magazine loaded and securely locked in place, your staple gun is now ready to tackle any stapling task you have in store.

Lock the Magazine

If you’re wondering how to load your Arrow Fastener staple gun properly, you’re in the right place. The first step is to lock the magazine in place to prevent accidents. Make sure your staple gun is unplugged and unloaded before proceeding.

Next, locate the magazine release located at the back of the gun and press it. Slide the magazine out and insert the staples with the pointed end facing down. Push the magazine back into place until you hear a click, indicating that it’s locked.

Always consult your user manual for specific instructions, as the process may vary depending on the model. With your magazine locked in place, you can be confident that your staple gun is ready for use.

Close the Magazine

Locking the magazine of your firearm is a crucial safety measure that should never be overlooked. It’s one of the simplest steps in handling a gun, but it can save lives. When you’re done firing, close the magazine first before ejecting any rounds from the chamber.

This ensures that there are no live rounds left in the gun and prevents any accidental discharge. It’s also important to note that the magazine release button should be avoided when closing the magazine, as this can allow a live round to remain in the chamber. Instead, use the slide stop lever or pull the slide back manually to close the magazine.

Always remember to check that the magazine is securely locked in place before handling your firearm. By making this a habit, you can ensure that your gun is always handled safely and responsibly.

Push Up the Magazine Release

When it comes to locking the magazine on your firearm, there are a few steps you need to follow to ensure it’s secure. Firstly, you need to push up the magazine release, which is often located near the trigger. This will disengage the magazine from the firearm and allow you to remove it safely.

Once you have removed the magazine, ensure that it’s unloaded before proceeding. To lock the magazine back into place, insert it into the magazine well until you hear a click. This indicates that the magazine is securely in place and won’t fall out during use.

It’s important to practice locking and unlocking the magazine before you use the firearm to become familiar with the process. Remember to always handle firearms with care and respect, and to follow all safety precautions to prevent accidents.

Test the Staple Gun

If you’re looking to use an Arrow Fastener staple gun, one of the first things you’ll need to know is how to load it correctly. It’s essential to understand this process to avoid any frustration or mistakes down the line. To start, open the staple gun and find the loading area.

From there, insert your staples with the pointy ends facing down and the flat ends facing up. Make sure the staples are aligned correctly, or they won’t fire correctly. Once you’ve finished loading the staples, it’s time to test the staple gun.

Hold it up to a piece of scrap wood and press down on the trigger. If everything is loaded correctly, you should see a staple pierce through the wood. If not, double-check the staple alignment and try again.

With these simple steps, loading an Arrow Fastener staple gun is a breeze.


Loading an Arrow Fastener staple gun is a needle in a haystack. But fear not, for with a steady hand and a bit of finesse, you can staple your way to success. Remember, the key is to start with the right staple size and then carefully load them into the magazine, making sure they are aligned and ready to fire.

With practice, you’ll become a staple-slinging pro in no time.”


What kind of staples can I use with the Arrow Fastener staple gun?
You can use Arrow T50 staples, as well as 1/4″ to 9/16″ staples from other brands.

How do I load the staples into the Arrow Fastener staple gun?
Firstly, pull back on the pusher rod until it locks into place. Then, slide the staples into the channel with the pointed end facing down. Release the pusher rod to engage the staples.

How many staples can be loaded into the Arrow Fastener staple gun at once?
The Arrow Fastener staple gun can hold a maximum of 85 staples at a time.

Why is my Arrow Fastener staple gun jamming?
The most common cause of jamming is using incorrect staples or loading them improperly. Make sure to use the correct staples and load them properly. If the issue persists, check for debris or damage in the gun’s mechanism.

Can the Arrow Fastener staple gun be used on hardwood?
Yes, the Arrow Fastener staple gun can be used on hardwood, but it is recommended to use longer staples for better penetration.

How can I adjust the depth of staples on the Arrow Fastener staple gun?
You can adjust the depth of staples by turning the screw located at the back of the staple gun clockwise or counterclockwise.

Is regular maintenance required for the Arrow Fastener staple gun?
Yes, regular maintenance is recommended to ensure optimal performance. This includes keeping the staple gun clean and lubricated, as well as checking for damage or wear and tear.

Show More

Related Articles