How to Lift a Car on 4 Jack Stands Safely: A Step-by-Step Guide

Lifting a car on four jack stands may seem daunting, especially for first-time DIYers. But the good news is that it’s not rocket science. All you need is a bit of understanding of the process and you can do it safely and efficiently.

So, how do you go about lifting a car on four jack stands? First of all, ensure that you have the necessary equipment, including four jack stands, a hydraulic floor jack, and wheel chocks. Once you have all the equipment in place, start by positioning the jack stands under the four corners of the vehicle and securing them in place. Before lifting the car, make sure to place the wheel chocks on the wheels that will remain on the ground.

This is important to prevent any accidental rolling when the car is lifted. Once the wheel chocks are in place, use the hydraulic floor jack to lift the car and carefully position it on the jack stands. It’s important to note that proper positioning of the jack stands is crucial to ensure safety.

The jack stands should be positioned in a way that distributes the weight of the car evenly, and they should be placed on a sturdy and level surface. Always double-check the positioning of the jack stands before proceeding. Lifting a car on four jack stands can be intimidating, but taking your time and following the proper steps can help you accomplish this task with ease.

With just a bit of patience and care, you’ll be able to safely lift your car and complete the necessary repairs or maintenance.

Safety Measures

When lifting a car on 4 jack stands, there are some essential safety measures you should follow to ensure that you and your vehicle remain safe. First, make sure that you are in a suitable environment, such as a level surface with ample space to work around the vehicle. Before you begin, inspect your jack stands to ensure they are in good condition and rated for the weight of your car.

Always use four jack stands and avoid lifting only one side of the vehicle at a time, which can cause instability. When lifting, place the jack stands under sturdy points on the chassis or frame of the vehicle, such as near the suspension or axle mounts. You should never place the jack stands under the bodywork or weak points of the vehicle, as this can result in damage or injury.

Once you’ve lifted the car, shake it slightly to make sure the jack stands are stable and secure. Remember to always use caution and follow manufacturer guidelines when lifting your car on four jack stands.

Check the Weight Limit of the Jack Stands

When it comes to car maintenance, safety should always be the top priority. If you’re planning on using jack stands, it’s important to check the weight limit before doing anything else. Each jack stand has a specific weight limit, and exceeding it can lead to dangerous accidents.

You should also make sure that the jack stand is placed on a flat, stable surface to prevent it from tipping over. It’s also a good idea to double-check the lock mechanism to ensure that the jack stand is securely locked in place. Accidents can happen at any time, but taking the necessary precautions can help prevent them.

By checking the weight limit, ensuring a stable base, and double-checking the lock mechanism, you can perform your car maintenance with confidence.

how to lift car on 4 jack stands

Inspect the Jack Stands for any Damage or Cracks

Safety Measures, Inspection, Jack Stands, Damage, Cracks When using jack stands to lift your vehicle, it is crucial to ensure that they are in good condition before use. The first step in doing so is to inspect them for any damage or cracks that may compromise their stability. Even the slightest defect can cause the jack stands to collapse under the weight of the vehicle, posing a significant safety risk.

Therefore, it is always wise to examine the jack stands thoroughly and carefully before use. Check the welding joints, the pins, and the base to ensure they are sturdy and not rusted. If you detect any damage, or if you are unsure if the jack stands are safe to use, it is best to replace them or seek the advice of a professional.

Remember, safety first!

Position the Car on a Level Surface

When preparing to work on your car, it’s important to ensure that it’s positioned on a level surface. This may seem like a simple precaution, but it’s important to take safety measures seriously in order to avoid accidents. Trying to work on a vehicle on an uneven or sloped surface can result in serious injuries, as the car could roll or shift unexpectedly.

When the car is on level ground, however, it gives you a stable base to work from, reducing the risk of accidents. In addition, working on a level surface can help you get a better view of what you’re doing, making it easier to identify and fix any issues with your car. So before you get started, take a few minutes to ensure that your vehicle is parked on flat and stable ground.

This small step can make a big difference in your safety and the success of your car maintenance project. So, never hesitate to spend some time preparing for the task at hand, and always make safety your top priority.

Engage the Parking Brake

One crucial step that drivers often overlook when parking their vehicle is engaging the parking brake. We may think that simply putting the vehicle in park is enough, but the parking brake serves as an extra layer of safety to prevent the car from rolling away. Especially when parked on an incline or uneven surface, the parking brake can keep the vehicle stationary and avoid accidents.

It’s a straightforward process – typically, you can engage the parking brake by pulling up a lever or pressing a button located near the center console. Additionally, remember to disengage the brake when starting the engine to prevent damage to the vehicle’s drivetrain. By following this safety measure, we can ensure a safer driving experience and avoid any potential mishaps.

Chock the Wheels That are Not Being Lifted

When operating heavy machinery, safety should be the number one priority. One essential safety measure that should not be overlooked is chocking the wheels that are not being lifted. Chocking the wheels can help prevent the equipment from rolling or moving unexpectedly, which can cause damage to property or harm to personnel.

It is crucial to use appropriate chocks that fit the size of the equipment’s tires and place them on both sides of the wheel. It’s not enough to rely on the equipment’s parking brake alone. Chocking the wheels should be a part of every safety protocol and performed each time the equipment is in use.

By chocking the wheels that are not being lifted, you can ensure the safety of all workers on the site, avoid unexpected incidents, and keep the machinery in good condition. Don’t underestimate the importance of this simple yet essential safety measure.

Lifting the Car

Are you planning on doing some repairs on your car and need to lift it up on 4 jack stands? It may seem like a daunting task, but with the proper tools and knowledge, it’s actually quite simple. The first step is to find a flat, level surface to work on and ensure that your car is in park with the emergency brake engaged. Then, place the jack stands in the appropriate locations under the car’s frame or designated jack points.

Use a hydraulic floor jack to slowly lift the car and carefully lower it onto the jack stands. It’s important to double-check that the car is securely resting on all four stands before proceeding with any repairs. With these steps, lifting your car onto 4 jack stands can be done safely and effectively.

Locate the Jack Points on the Car

When lifting a car, it’s important to locate the jack points. These are specific areas on the car’s chassis where you can safely place a jack without damaging the vehicle. Most cars have four jack points, two in the front and two in the back.

You can typically find them by consulting your car’s owner manual or by looking for notches or grooves on the underside of the car. Once you’ve found the jack points, it’s important to position the jack correctly. Make sure the jack is centered on the jack point and that the saddle is securely seated on it.

Also, remember to place jack stands under the car for added support before you start working under the vehicle. By properly locating the jack points, you can safely lift your car and tackle any repairs or maintenance that you need to do.

Place the First Jack Stand under the Jack Point

When it comes to lifting the car, safety should always be the top priority. The first step in the process is to locate the jack point, which is typically indicated in the owner’s manual or on the vehicle. Once the jack point is located, place the first jack stand underneath it.

This ensures that the car is stable and won’t shift during the lifting process. The jack stand should be moved into place with care, making sure that it is properly aligned with the jack point, and then secured. Using the jack stand is a crucial safety measure because it prevents the car from falling while it is being lifted.

Remember, it’s better to take the time to get this step right than to risk damaging the car or injuring yourself. By prioritizing safety and taking the proper precautions, you can safely lift your car and perform any necessary maintenance or repairs.

Repeat the Process for the Other Three Jack Stands

Now that you’ve successfully lifted one side of your car with a jack stand, it’s time to repeat the process for the other three. Make sure to use the same method and follow all safety precautions as before. Position each jack stand under the car’s recommended lift points, and slowly lower the vehicle onto them.

Double-check that each jack stand is securely in place before continuing. Once all four jack stands are in place, perform a final check to confirm that the car is level and stable before beginning any work on it. Remember, safety should always come first when working with car lifts, so take your time and follow the proper steps to ensure a successful lift every time.

Double Check the Placement of the Jack Stands

When it comes to lifting your car, safety should always be your top priority. One crucial aspect of ensuring safety is double-checking the placement of the jack stands. It’s essential to choose a flat and level surface to avoid any accidents.

You should also make sure that the stands are firmly in place and engaged with the car’s frame. If they’re not properly placed, they can slip or collapse, leading to catastrophic consequences. Imagine trying to balance a book on a wobbly surface; it’s bound to fall eventually.

The same principle applies here. By taking the time to double-check the placement of the stands, you reduce the risk of an accident and increase your safety. So, take a few extra moments to ensure that your jack stands are securely in place before lifting your car to avoid any mishaps and keep yourself safe.

Lowering the Car

If you want to lower your car for an improved look or better handling, then you’ll want to lift your car onto four jack stands to do the job safely. Before you start, ensure you choose a flat, even surface to work on and don’t attempt to work on your car when it is on an incline or decline. With your car in neutral and parking brake engaged, position the four jack stands in a square or rectangular pattern with one at each corner.

Place each jack stand directly underneath a solid structural part of your car such as the frame or designated lifting point. Once each jack stand is in place, slowly lower your car onto them by using your floor jack. Double-check that each stand is holding the weight of your car correctly and make any necessary adjustments.

Once everything is secure, it is now safe to start working on the underside of your car. Just remember, never crawl under a car that is not properly supported by jack stands.

Remove the Jack Stands

When it comes time to remove the jack stands and lower your car, there are a few important things to keep in mind. First and foremost, you’ll want to make sure that you are in a safe and stable position to lower the vehicle. This means checking that the area around the car is clear of debris that could get in the way, and that the ground beneath the tires is level and solid.

Once you’re confident in your setup, it’s time to start lowering the car. To do this, you’ll want to use your jack to carefully lower each corner of the car in turn. Remember to go slowly and keep an eye on the car as it comes down, looking out for any signs of instability or sudden movement.

Once you’ve lowered all four corners of the car, it’s time to remove the jack stands. To do this, simply lift each stand out from under the car, taking care not to let it fall or damage the surrounding area. Once all of the stands have been removed, give the car a final once-over to make sure that everything is in order before you take it for a test drive.

By following these simple steps, you can safely and effectively remove your jack stands and get your car back on the road in no time.

Slowly Lower the Car onto the Ground

After successfully completing the necessary repairs on your car, it’s time to lower it back onto the ground. The first step is to make sure all the tools and equipment are cleared from under the car. Once they are safely out of the way, take hold of the hydraulic floor jack and gently lower the car.

Remember to lower the vehicle slowly to avoid any sudden jerking that could damage the newly repaired parts or the tires. As you bring the car down, keep an eye on the clearance between the car and the ground. You want to ensure that the car is sitting level before letting go of the jack.

A slight tilt can cause difficulty when trying to operate the newly repaired parts, and can also make it harder to drive. Once the car is level, carefully remove the jack, making sure to maintain balance and stability. Lowering a car safely requires methodical planning and a steady hand, so don’t rush through this crucial process.

Test the Stability of the Car on the Jack Stands After Lowering

After working on your car and lifting it up with jack stands, it’s important that you lower the vehicle back down safely. However, you don’t want to assume that just because you’ve lowered the car, everything is now stable. Before removing the jack stands, it’s crucial to test the stability of the car.

This means making sure it’s not wobbling or rocking back and forth. To test the stability, apply pressure to the different corners of the car and observe for any movement. If it feels solid and secure, you can then remove the jack stands and lower the vehicle completely.

But never assume that everything is okay without testing first. The last thing you want is for the car to suddenly fall while you’re underneath it. Safety always comes first when working on your vehicle.


If you’re looking to lift a car on four jack stands, there’s no need to reinvent the wheel. All you need is a sturdy jack, four jack stands, and a bit of patience. From there, it’s all about finding the right balance between safety and convenience.

So if you want to lift your ride safely and securely, just remember to keep your wits about you and follow these simple steps. And who knows? With a bit of practice, you might just become the world’s greatest car lifter – or at least the envy of your neighborhood mechanic.”


What is the proper procedure for lifting a car with 4 jack stands?
To lift a car with 4 jack stands, park the car on a flat surface and engage the emergency brake. Locate the recommended jacking points in the car manual and use a hydraulic floor jack to lift one side of the car and place a jack stand under the jacking point. Repeat on the other side until all four jack stands are securely in place.

Is it safe to lift a car with 4 jack stands?
Yes, lifting a car with 4 jack stands is safe as long as proper procedures are followed. Ensure that the car is on a flat surface, the emergency brake is engaged and the jacking points are correctly identified before lifting the car.

Can I use any jack stands to lift a car on four stands?
No, it is important to use jack stands that are rated to support the weight of the vehicle. Refer to the manual that comes with the jack stands and ensure that it matches the weight of the car.

How high should I lift the car when using 4 jack stands?
You should lift the car to the height necessary to perform the maintenance, but no higher than the recommended lift point in the car manual.

How many jack stands do I need to lift a car?
You will need four jack stands to lift a car safely and evenly.

Can I place jack stands on any part of the car frame?
No, you cannot place jack stands on any part of the car frame. Consult the car manual to locate the recommended jacking points before lifting the car.

Can I leave a car on 4 jack stands overnight?
No, it’s not recommended to leave a car on 4 jack stands overnight. It’s best to lower the car down on all four wheels or leave it on the jack stands for only a short time to avoid damage to the suspension and other components.

Show More

Related Articles