How to Use Craftsman Staple Gun: The Ultimate Guide for Beginners

Have you ever found yourself in a situation where you need to upholster or fix some furniture or fabric, but you’re not sure how to go about it? Well, look no further than the Craftsman Staple Gun. This powerful and versatile tool is a must-have for any DIY enthusiast or professional upholsterer. With its easy-to-use design and sturdy construction, the Craftsman Staple Gun makes completing any upholstery task a breeze.

So whether you’re reupholstering an old armchair or fixing the fabric on your couch, this trusty tool will help you get the job done quickly and efficiently. In this article, we’ll discuss how to use the Craftsman Staple Gun and share some tips and tricks to help you get the most out of this essential piece of equipment.

Load the Staples

If you’re looking to tackle a home improvement project, a craftsman staple gun can be a valuable tool in your arsenal. However, using one may seem daunting if you’ve never done it before. To begin, you’ll need to load the staples into the chamber.

This process may vary slightly depending on the model of your staple gun, so be sure to consult the instructions that come with it. In general, though, you’ll need to open the chamber, which is usually located at the bottom of the gun, and slide the staples in. Make sure they are facing the correct way, as indicated by the arrow on the package.

Then, push the chamber closed until it clicks securely in place. With the staples loaded, you should be ready to start stapling. Remember to hold the gun perpendicular to the surface you’re stapling and to apply firm, steady pressure.

With a bit of practice, you’ll be a craftsman staple gun pro in no time!

1. Make sure the gun is unplugged or has no power.

When it comes to using a staple gun, safety should always be your top priority. Before loading the staples, ensure the gun is unplugged or has no power. This simple safety measure will prevent any accidental firing of staples that could cause injury.

Once the gun is unplugged, it’s time to load the staples. First, check the size of the staples recommended for your gun and purchase the appropriate size. Next, locate the loading chamber and release the pusher rod.

Place the staples in the chamber with the points facing down and the heads facing up. Push the pusher rod back in until it clicks into place. Finally, test the gun by firing off a few practice staples onto a scrap piece of material to ensure it’s working correctly.

By following these steps, you’ll be able to load your staple gun safely and efficiently. Remember, always prioritize your safety when using any tool.

how to use craftsman staple gun

2. Slide the staple load chamber open.

When it comes to loading staples into your stapler, the first step is to slide open the staple load chamber. This chamber is usually located on the underside of the stapler and can be easily opened by pushing a small button or lever. Once the chamber is open, you can insert a strip of staples into the slot, with the pointed ends facing down.

It’s important to make sure that the staples fit snugly into the slot and are correctly aligned, as this will ensure that they are properly loaded and ready for use. If you’re unsure about how to load the staples, be sure to consult your stapler’s instruction manual for more detailed guidance. By taking the time to properly load your staples, you can ensure that your stapler operates smoothly and efficiently, saving you time and frustration in the long run.

So go ahead and get those staples loaded up, and get to work on those important documents and projects.

3. Insert a strip of staples, with the pointed end facing down.

Loading staples into a stapler may seem like a no-brainer, but there are simple steps that can be easily overlooked. To load the staples, first, you need to locate the staple tray at the back of the stapler. Some staplers have a release button or latch that must be pressed or pushed before the staple tray is exposed.

With the tray opened, you can proceed to insert the strip of staples with pointed ends facing down. The strip of staples fits snuggly in the tray and should be pushed all the way to the rear of the tool. Be sure to double-check that the staples are properly in place before attempting to use the stapler.

Failure to load staples correctly may result in jams, misfires or injuries. By carefully following these simple steps, you can load the staples in your stapler with ease and efficiency, allowing you to get back to your work without any complications.

4. Close the staple load chamber.

To load the staples into your stapler, you first need to locate the staple load chamber. Once you’ve found it, pull it open. Depending on your stapler model, the chamber may be on the bottom, back or top of the stapler.

Double-check your stapler manual if you can’t see it. Next, take the strip of staples and insert it into the chamber. Make sure the staple legs face downwards and that you push the strip to the very end of the chamber.

This step is important as the device staples through the lower part of the paper. Once the staples have been correctly inserted, close the staple load chamber firmly to avoid any accidental misfires. Remember, a jammed stapler can be frustrating to unjam, and it can even damage your stapler in the process.

So, it’s essential to load the staples properly to avoid any unpleasant surprises down the line.

Adjust the Depth Control

If you’re wondering how to use a Craftsman staple gun, it’s important to understand how to adjust the depth control. This feature determines how deep the staple is driven into the material and can be adjusted based on the thickness and density of the material you’re working with. To adjust the depth control, first, make sure the device is unplugged or that the battery is removed.

Then, turn the depth control wheel located on the bottom of the gun to a higher number if you need a deeper staple or a lower number if you need a shallower staple. Be sure to test the depth by stapling a scrap piece of material before using the staple gun on your project to avoid any damage or mistakes. Taking the time to adjust the depth control will ensure that your staple gun is working correctly and that your project is completed with professional results.

So, grab your Craftsman staple gun and get started on that DIY project today!

1. Identify the depth control knob.

If you’re looking to improve the depth of your projects, the first thing you’ll want to do is adjust the depth control on your equipment. This is an important knob to identify because it will allow you to control how deep your cuts are, which is crucial for ensuring that your work is precise and consistent. The depth control knob can typically be found on the side or front of your equipment, and it’s usually labeled as such.

Once you’ve located the knob, you can start making adjustments to improve your work. For beginners, it’s recommended to make small adjustments at a time and to test your cuts before making any further changes. By taking the time to master the depth control knob, you’ll be able to take your skills to the next level and create even more impressive projects.

2. Turn the knob to adjust the depth of the staple penetration.

When using a staple gun, it’s important to adjust the depth of penetration to ensure that the staple goes in just the right amount. That’s where the depth control knob comes in. By turning this knob, you can adjust the amount of penetration that the staple will have, depending on the thickness of the material you’re working with.

This is a critical step in using a staple gun, as a staple that is too deep can damage or weaken the material, while a staple that is too shallow won’t hold up. That’s why it’s important to take the time to adjust the depth control knob to the right setting before you start stapling. By doing so, you’ll be able to ensure that your staples are strong, secure, and long-lasting, whether you’re working on a DIY project at home or on a professional job site.

So don’t forget to pay attention to the depth control knob the next time you use your staple gun — it can make all the difference in the world!

3. Test the staple gun on a scrap piece of material to ensure the correct depth is set.

When working with a staple gun, it’s essential to make sure that the depth is set correctly to avoid damaging your material. That’s where the depth control comes in handy – it allows you to adjust the staple’s depth and ensures that it won’t be too shallow or too deep, which is especially important when working with different kinds of materials. To adjust the depth control, start by testing the staple gun on a scrap piece of material.

If the staple is too shallow, increase the depth by turning the control dial clockwise. If the staple is too deep, reduce the depth by turning the control dial counterclockwise. Remember to adjust the depth settings as needed for each project to prevent damaging your materials or having the staples come loose.

Overall, taking the time to adjust the depth control on your staple gun can make all the difference in the final quality of your project, allowing you to work more efficiently and effectively.

Use the Staple Gun

Craftsman staple guns are useful tools to have around the house, office, or workshop. They are used for a variety of tasks, such as upholstery, carpentry, and general repairs. If you’re new to using a Craftsman staple gun, it’s essential to start by reading the manufacturer’s instructions.

Once you understand how to load the staples and adjust the depth settings, it’s time to get started. To use the staple gun effectively, position the surface you want to staple, grasp the tool firmly, and press it down until it’s flush with the surface. Next, aim the gun where you want the staple to go, and pull the trigger to dispense the staple.

Make sure to keep your hands and fingers clear of the staple exit point to avoid accidental injury. With a bit of practice, you’ll get comfortable using the staple gun and be able to tackle any project that requires one. Remember to keep the gun clean, lubricated, and stored safely for optimal performance.

1. Hold the gun firmly with one hand.

If you’re planning to use a staple gun, it’s important to know how to handle it safely. First things first, hold the gun firmly with one hand to ensure stability while you work. The other hand should be used to guide the staple gun to the precise spot where you want to staple.

A good way to approach this is to use your non-dominant hand to hold the object being stapled, while the dominant hand holds the gun, placing your thumb on the trigger. When you’re ready to staple, press the gun against the surface and squeeze the trigger. Remember to keep your fingers and other body parts away from the stapling area.

In case of any jams, unplug the staple gun and remove the staples before restarting. Always use the right staples according to the size of the gun. By utilizing the staple gun correctly, you can easily complete your fastening tasks with minimal hassle.

2. Place the staple gun on the material to be stapled.

If you’re looking for a quick and easy way to secure fabric or other materials, a staple gun can get the job done in no time. The first step to using a staple gun is to place it firmly on the material you want to staple. Make sure you’re holding it securely and in a position where you’ll be able to apply pressure evenly.

Once you’ve found the right spot, press down on the staple gun until it clicks. This will indicate that the staple has been secured, and you’re ready to move on to the next section. When using a staple gun, it’s important to always follow proper safety precautions, including wearing eye protection and keeping your hands clear of the stapling area.

With a bit of practice and attention to detail, you’ll be able to use a staple gun efficiently and effectively for all your stapling needs. So why not give it a try? Whether you’re crafting, upholstering, or just need to secure some items around the house, a staple gun can make the process much quicker and easier.

3. Squeeze the trigger to shoot the staple.

To use a staple gun, start by securing the material you want to staple tightly against a solid surface. Then, ensure that the staple gun is loaded with the correct staples for the job and that the safety latch is engaged. To staple, position the staple gun over the area you want to staple, aligning the staple with the material, and press it down firmly.

Finally, squeeze the trigger to shoot the staple into place. Remember that staple guns can be dangerous tools, so always wear protective gear, exercise caution, and follow safety procedures when using them. With a little practice and care, using a staple gun can be a simple and useful way to fasten your materials together quickly and securely.

4. Release the trigger and move on to the next staple.

If you’ve ever needed to fasten wood, fabric, or any other material together, a staple gun is a must-have tool. It’s not difficult to use, but proper usage is essential to ensure it works correctly and doesn’t cause any injury to you or others. Begin by pressing the tip of the staple gun against the surface of your material.

Next, grip the handle and squeeze it to compress the spring mechanism inside. Be careful not to overdo it since this could result in the staple traveling too far and causing harm. Aim the tip of the staple gun at the spot where you want to fasten the materials and squeeze the trigger to shoot the staple out.

When you’re done, release the trigger and move on to the next staple. With the right technique, a staple gun can be an easy and excellent tool to use.

Unloading Staples

If you’re wondering how to use a Craftsman staple gun, one important step is to know how to unload staples from the tool. There are different models of Craftsman staple guns, but most of them feature a staple magazine that can be easily removed or opened to access the staple chamber. To unload the staples, first make sure the gun is not loaded and disconnected from the power source.

Then, locate the release lever or button that allows you to open the staple magazine. Some models require to push the release lever while others require to slide it. Once the magazine is open, carefully remove any remaining staples from the chamber using pliers or your fingers.

Make sure to wear protective gloves to prevent injuries. Once the staples are removed, you can close the staple magazine and reload the gun with new staples. Remember to follow the instructions on your Craftsman staple gun model to ensure proper usage and maintenance.

1. Disconnect the power or unplug the gun.

When it comes to unloading staples from a staple gun, the first and most important step is to disconnect the power source. This means either unplugging the gun or removing the battery if it’s cordless. This step may seem obvious, but it’s crucial to ensure your safety.

Without disconnecting the power, the gun could accidentally fire off a staple, causing injury or damage. Once the power is disconnected, you can then safely access the staples within the gun and carefully remove them one by one. It’s important to take your time during this process and be mindful of any remaining staples in the gun to avoid accidental discharge.

By following this simple yet essential step, you can safely and effectively unload your staple gun with ease.

2. Slide the staple load chamber open.

If you need to unload staples from your stapler, here’s what you need to do: slide the staple load chamber open. This isn’t as tricky as it may sound – simply locate the release button or lever at the back of the machine, and gently push or pull it until the chamber pops open. Once you have access to the staples, you can either carefully remove them one by one or shake the stapler to dislodge them.

It’s important to be gentle with your stapler when unloading staples to avoid damaging the machine or the remaining staples. After you’ve successfully removed all the staples, be sure to close the chamber tightly before reloading it with new ones. With these simple steps, you can safely and effectively unload staples from your stapler.

3. Remove any remaining staples.

When unloading staples, it’s important to not overlook any remaining staples that may be left behind. These tiny pieces of metal can be dangerous and cause injury if not properly removed. To do so, use a staple remover or pliers to carefully extract each staple.

Start at one end and work your way down the line, grabbing hold of each staple and gently pulling it out. Once you’ve removed all visible staples, use a flashlight to inspect the area and ensure no staples have been missed. If you do find any remaining staples, repeat the process until the area is completely clear.

Removing all staples will not only make it safer to handle the material but also ensure that the material can be properly recycled or disposed of. So, take the time to thoroughly unload any staples and keep yourself and others safe in the process.

4. Close the staple load chamber.

Unloading Staples Once you’ve finished a round of stapling and need to refill your stapler, the first step is to unload any remaining staples from the previous batch. To do this, locate the staple release button or switch on your stapler. This may be located on the bottom or the back of the stapler, depending on the model.

Press or slide the release button to open the staple load chamber. Be sure to hold onto the staple cartridge or follower to prevent staples from spilling out. Once you’ve emptied the staple load chamber, close it back up securely.

Now you’re ready to refill the stapler with new staples and get back to work. Remember to handle used staples carefully to prevent any accidental pokes or injuries. With this simple process, your stapler will stay in good working condition and provide you with reliable stapling for all your projects.


So there you have it, folks! Using a Craftsman staple gun is as easy as pie. With a little practice and patience, you’ll soon be stapling your way through projects like a seasoned DIY pro. Just remember to follow these simple steps: load the staples, adjust the depth control, aim and fire away! Now go forth and staple with reckless abandon (but remember to always wear eye protection).

Your craft projects, furniture repairs, and DIY dreams will thank you!”


How to load staples in a Craftsman staple gun?
To load staples in a Craftsman staple gun, first, slide the pusher rod back and open the magazine. Then, insert the staples and close the magazine.

Can I use staples of any size in a Craftsman staple gun?
No, Craftsman staple guns are designed to use specific sizes of staples. Make sure to select the correct staple size mentioned in the user manual.

How to clear a jammed Craftsman staple gun?
If your Craftsman staple gun is jammed, first, make sure to disconnect it from the power source. Then, remove the magazine and pusher rod, and clear any jammed staples. Reassemble the parts and test the staple gun.

How to adjust the depth of the staple in a Craftsman staple gun?
Some Craftsman staple guns have depth control, which allows adjusting the depth of the staple. Check the user manual to confirm if your staple gun has this feature and how to adjust it.

Why are my staples not driving all the way in with a Craftsman staple gun?
There could be several reasons why your staples are not driving all the way in with a Craftsman staple gun, such as incorrect staple size, low air pressure, or a worn-out driver blade. Check these factors and troubleshoot accordingly.

How to lubricate a Craftsman staple gun?
Craftsman staple guns require periodic lubrication to keep them functioning smoothly. Apply a few drops of pneumatic tool oil to the air inlet of the staple gun before use.

How to maintain a Craftsman staple gun?
To maintain a Craftsman staple gun, clean it after every use, avoid overloading it, and replace worn-out parts like driver blades. It is also essential to store it in a dry place and away from dust and moisture.

Show More

Related Articles