How to Turn a Cordless Drill into a Corded Drill: The Ultimate Guide

Do you have a cordless drill that just doesn’t have the power to complete the job anymore? Or maybe you’re looking to save some money by converting your cordless drill to a corded model? Whatever the reason, converting your cordless drill to a corded one is a smart move. Not only will it give you more power, but you’ll never have to worry about recharging batteries or running out of power at the worst possible moment. In this article, we’ll take a look at the process of converting your cordless drill into a corded one and provide you with everything you need to know to get started.


Are you looking to turn your cordless drill into a corded one for those tough jobs that require more power? It may sound like a complicated process, but with a few simple steps, you can do it yourself. First, you will need a power supply with a compatible voltage and current rating to the drill’s motor. Then disconnect the battery and power it through the power supply using wire connectors.

Finally, use a switch to control the flow of power and turn on/off the drill. And voila! You now have a corded drill that can handle even the most challenging jobs. With this new setup, you won’t have to worry about running out of battery in the middle of your project, and you’ll have more control over the drill’s power.

So why not try it out and see the results for yourself?

Understanding the Basic Principle

Have you ever wondered what the basic principle of understanding something really is? Well, to put it simply, it’s all about grasping the fundamental concepts and ideas behind a particular subject matter. Whether you’re trying to learn a new language or trying to solve a complex math problem, understanding the basic principle requires breaking the topic into smaller, more manageable parts and figuring out how they all fit together. It’s like building a Lego structure – you start with the building blocks, figuring out how each one connects to the other, and before you know it, you have a solid and complete structure.

The same goes for learning. Once you have a good grasp of the basic principles, you can start to build on that foundation and develop a deeper understanding of the subject matter. So, let’s start breaking down those building blocks and get to learning!

how to turn a cordless drill into a corded drill

Safety Precautions

When it comes to safety precautions, it’s important to understand that accidents and mishaps can happen to anyone, anywhere, at any time. That’s why it’s crucial to take the necessary steps to ensure that you and those around you are safe and secure. Whether you’re at home, work, school, or out and about, it’s important to remain vigilant and aware of your surroundings.

This means taking extra care when handling sharp objects, dangerous chemicals, and heavy machinery. It also means wearing protective gear such as helmets, gloves, and safety goggles when engaging in potentially hazardous activities. By taking these simple but effective steps, you can significantly reduce the risk of accidents occurring and keep yourself and those around you safe from harm.

So always remember, safety first!

Materials Needed

If you’re looking to turn a cordless drill into a corded drill, you’ll need a few materials to get started. First and foremost, you’ll need a drill chuck and a power cord. You’ll also need a power supply unit to provide the drill with its required power source.

This can either be a premade unit that’s specifically designed for drills or a custom-made setup using a power adapter. Once you have these items, you’ll need to remove the battery from your cordless drill and connect the power cord to the drill’s power input. Make sure to securely attach the drill chuck to the drill’s spindle and tighten it using the chuck key.

With the correct materials and a little bit of patience, you’ll be able to transform your cordless drill into a powerful corded tool that can handle all of your drilling needs!

List of Items Required

To make sure you have everything you need for your upcoming project, here is a comprehensive list of materials that you will need. Firstly, you will need to consider the tool and equipment requirements for the project. This may include hand and power tools such as hammers, saws, drills, screwdrivers, pliers, clamps, and more.

Additionally, you may need protective gear such as gloves, safety glasses, and masks. It’s important to consider the type and quantity of materials you will require, which may include wood, metal, concrete, plumbing fixtures, or electrical wiring. Other essential materials you may need are fasteners such as screws, nails, bolts, and nuts.

Finally, you may also require specialized materials such as adhesives or sealants. By ensuring that you have all the required materials on hand before you start your project, you’ll be better able to focus on the work itself and ensure that it goes smoothly.

You May Also Love:

Steps to Convert Drill

If you’re looking for a way to convert your cordless drill into a corded drill, it’s actually quite simple. The process involves purchasing a power cord that matches the voltage of your drill and installing it onto the drill. You’ll also need to remove the battery, as it won’t be needed anymore.

Once the cord is attached, you’ll plug it into an outlet and your drill is ready to go! This can be a great way to save money on batteries and ensure that your drill always has the power it needs to get the job done. Plus, you’ll never have to worry about your battery dying in the middle of a project again. Overall, converting a cordless drill to a corded drill is a quick and easy process that anyone can do.

Step 1: Removing the Battery

If you’re looking to convert your cordless drill into a corded one, the first step is to remove the battery. This may seem obvious, but it’s important to ensure that there is no power source connected to the drill when you start working on it. Locate the battery release button on your drill and press it to release the battery.

Once you’ve removed the battery, you can continue with the rest of the conversion process. Some cordless drills may have a different method for removing the battery, so be sure to consult your user manual if you’re unsure. With the battery out of the way, you’re one step closer to turning your cordless drill into a powerhouse corded tool.

Step 2: Disconnecting Motor Wires

After selecting the appropriate drill and securing the necessary tools, the next step in converting your drill to a motor is to disconnect the motor wires. This step is crucial as it will help to ensure that you do not accidentally power the drill motor, which can result in severe injury or damage. To disconnect the motor wires, you should first locate them on the drill and then gently pull them out of their respective terminals.

Be sure to label each wire using tape or a marker to ensure that you can easily reconnect them later. It’s also recommended to double check that the drill motor is disconnected from any power source to avoid any electrical hazards. By following these steps, you’ll be well on your way to successfully converting your drill into a motor-driven tool that can power a wide range of applications.

Step 3: Connecting the Power Cord

In step 3, we will connect the power cord to our converted drill. This step is essential as it will power the drill and allow us to use it to complete our DIY tasks. Before connecting the power cord, ensure that your drill is turned off and unplugged.

Then, locate the circular opening at the bottom of the drill where the cord will be inserted. Once you have found it, insert the plug of the power cord into the opening, making sure that it fits snugly in place. Finally, plug in the cord into an electrical outlet and turn on the drill.

Congratulations, you have successfully converted your drill for DIY uses. Remember to always wear proper safety gear and follow all necessary precautions when using power tools. Happy drilling!

Step 4: Testing the Drill

After converting your drill, it’s time to test it out! Start off by double-checking all the connections and making sure everything is secure. The last thing you want is to power it up and have something come loose. Once you’re confident everything’s in place, plug it in and switch it on.

Listen carefully for any unusual sounds or vibrations – these could indicate that something isn’t quite right. If everything seems normal, give it a test run on a small piece of wood or plastic. Don’t start with anything too difficult or large, as you want to make sure your adjustments have been successful before moving on to any bigger projects.

Remember, safety is of the utmost importance when working with power tools, so make sure you’re wearing the appropriate protective gear and working in a safe space. With a successful test run, you’re now ready to start using your newly converted drill for all kinds of DIY projects!


Well, there you have it, folks! By following these simple steps, you can easily turn your cordless drill into a corded drill. No more worrying about running out of battery power in the middle of a project. With just a few extra components and a little bit of elbow grease, you can upgrade your drill to be even more versatile and powerful.

It’s like turning your Honda into a Ferrari…

okay, maybe not quite that extreme, but you get the point. So, go forth and drill like a pro, my friends!”


What is the benefit of turning a cordless drill into a corded drill?
The benefit of turning a cordless drill into a corded drill is that you’ll have a constant power supply which can enhance the tool’s performance and make it suitable for heavy-duty applications.

Can any cordless drill be converted into a corded drill?
Not all cordless drills can be converted into a corded drill. You need to check the drill’s motor ratings and specifications to ensure it can handle the constant power supply before attempting any modification.

What are the steps involved in turning a cordless drill into a corded drill?
The steps involved in turning a cordless drill into a corded drill include selecting the correct corded drill attachment, removing the battery, finding a suitable power supply, wiring the drill, and testing the tool to ensure it works properly.

Can a corded drill attachment damage the cordless drill?
If you select the appropriate attachment and follow the correct modification steps, a corded drill attachment will not damage the cordless drill.

What type of power supply do I need to turn my cordless drill into a corded drill?
You need to find a power supply that matches the motor rating and specifications of your cordless drill. A typical power supply for a corded drill can be a wall outlet, generator, or battery.

Is it worth converting a cordless drill into a corded drill?
It depends on the intended application of the drill. If you need a more powerful and reliable tool, then it’s worth converting a cordless drill into a corded drill. However, if you only use the drill for light tasks, then it may not be necessary.

Should I attempt to modify the cordless drill myself or ask a professional?
If you’re not experienced with power tools and electrical wiring, it’s safer to ask a professional for help. Attempting to modify the drill yourself can be risky and may result in damage to the tool or injury to yourself.

Show More

Related Articles