How to Revive a Dead Cordless Drill Battery: Tips and Tricks

how to revive a dead cordless drill battery

Are you tired of your cordless drill battery dying on you while in the middle of a project? Don’t worry, you’re not alone. It’s a common problem among DIY enthusiasts and professionals alike. The good news is that you don’t necessarily need to replace your dead battery with a new one.

Reviving a dead cordless drill battery can actually be done with a few simple tricks and tips that we’ll explore in this blog post. First and foremost, it’s important to understand why your cordless drill battery died in the first place. Usually, it’s due to prolonged usage, leaving it uncharged for an extended period of time, or exposing it to extreme temperatures.

Once you identify the problem, it’s time to tackle it and revive your battery. One solution is to jumpstart the battery with another battery that has a similar voltage. Another option is to recharge the battery slowly and steadily, before using it again.

You may also want to try cleaning the battery contacts or replacing the battery cells if they are damaged. However, these are just a few of the many tips and tricks that we’ll cover in detail. We’ll discuss methods for testing the battery’s voltage, how to properly charge the battery, and how to store it for maximum lifespan.

Reviving a dead cordless drill battery may seem overwhelming at first, but it’s a lot simpler than you might think. By following some easy tips and tricks, you can save money and prolong the life of your cordless drill without having to purchase a new battery every time. So, let’s get started and let this blog post guide you in the right direction.

Determining the Cause of the Battery Failure

If you’ve found yourself with a dead cordless drill battery, you may be wondering if you can revive it rather than shell out money for a replacement. The first step to reviving a dead battery is determining the cause of the failure. Batteries can fail for a variety of reasons, including overcharging, discharging to complete depletion, or simply being old and worn out.

If you suspect overcharging may be the culprit, check the charger to make sure it’s working properly and not overcharging the battery. Similarly, if you believe the battery was discharged too much, try charging it for a longer period of time than usual to see if that helps. If the battery is simply old and worn out, it may be time to invest in a new one.

By identifying the cause of the failure, you’ll be able to better determine if reviving the battery is worth the effort or if investing in a new one is the best choice.

Checking for Physical Damage

When your car battery fails, it’s important to determine the cause to prevent future issues. One way to do this is by checking for physical damage. Look for any cracks, leaks, or corrosion on the battery itself or its terminals.

If you find any damage, it could indicate a problem with the charging system or excessive heat exposure. However, if there’s no physical damage, the issue may lie with the battery’s age or usage. It’s important to keep in mind that car batteries have a limited lifespan and will eventually need to be replaced.

If you’re unsure of the cause of your battery failure, it’s always a good idea to consult with a professional mechanic. They can help diagnose the problem and recommend the best solution for your needs. By taking the time to investigate the cause of your battery failure, you can save yourself time and money in the long run and keep your vehicle running smoothly.

how to revive a dead cordless drill battery

Testing the Voltage

When your car battery suddenly fails, it’s time to test the voltage to determine the root cause. This simple process can save you from costly repairs and replacements. First, connect your voltmeter to your battery terminals.

With the engine turned off and all electrical systems disabled, a healthy battery should show a resting voltage of around 16 volts. Anything lower indicates a weak battery or a problem with the charging system.

Next, turn on the engine and check the voltage again. It should show around 14 volts, which means your alternator is working correctly. If the voltage remains low or fluctuates, it’s time to replace the battery or seek further diagnosis of the charging system.

Remember to test your battery regularly to catch potential issues early and ensure reliable performance on the road.

You May Also Love:

Reviving the Battery

If you’re facing the unfortunate situation of a dead cordless drill battery, don’t worry because it’s not necessarily time to throw it out just yet. There are steps you can take to try and revive it. First, connect the battery to the charger fully and leave it to charge for a few hours.

If there is no response, you can try jump-starting the battery by connecting it to a fully charged battery of a similar voltage. Alternatively, you can discharge the battery completely and try charging it again. If all else fails, you might need to replace the battery, but reviving it is worth a try before investing in a new one.

Remember to dispose of old batteries correctly by taking them to a recycling facility instead of throwing them in the trash. By following these steps, you can potentially revive your cordless drill battery and save some money in the process.

Using a Charger

Using a charger is a simple and effective way to revive a dead or dying battery. First, ensure that the charger you’re using is compatible with your battery type, as some chargers may only work with specific batteries. Then, connect the charger to the battery, making sure to follow the correct polarity (positive to positive and negative to negative).

It’s important to monitor the charging progress, as overcharging can damage the battery and undercharging may not revive it fully. Once the battery is fully charged, disconnect the charger and test the battery’s performance. Using a charger is a great option for reviving a battery, but it’s important to handle the process with care to ensure the best results.

Remember, patience is key when it comes to reviving a dead battery – it may take several attempts before seeing improvement.

Jump Starting with Another Battery

Jump Starting with Another Battery: Reviving Your Dead Battery There’s nothing worse than being stranded with a dead car battery, especially when you’re in a hurry. But fear not, it’s easy to jump-start your car by using another vehicle’s battery. First, ensure safety by turning off both ignition and all electrical components in both vehicles.

Attach the positive cable from the working battery to your dead battery’s positive terminal. Then, attach the negative cable to the negative terminal of the working battery and clamp the other negative cable onto a metal surface within your car. Start the working car, and it will transfer the charge to your dead battery, which should start up within a few minutes.

Once your car is running, carefully remove the cables in reverse order and let your car run for at least ten minutes before turning it off. That should give your car’s battery enough time to recharge and you’ll be ready to hit the road again in no time. Always make sure that the battery you are borrowing from another car has enough power.

A weak battery will be of no help and will waste your time.

Freezing the Battery

If you’re experiencing issues with your car battery, one potential solution is to freeze it. Freezing the battery can actually revive it in some cases. Here’s how it works: when a battery is frozen, the electrolyte solution inside the battery (which is what conducts electricity) expands and contracts as it freezes and thaws.

This expansion and contraction can help to crack any sulfate crystals that have built up on the battery’s plates, which is often the cause of battery failure. However, it’s important to note that not all batteries can be revived through freezing. It’s best to consult with a professional to determine if this method would work for your specific situation.

Additionally, it’s crucial to take safety precautions when handling a frozen battery, as it can be incredibly dangerous if not handled properly. With caution and the appropriate knowledge, freezing your battery could potentially solve your battery issues and save you money on a replacement.

Maintaining a Healthy Battery

Cordless drills are a handy tool to have around the house or on a construction site. One of the most common issues with cordless drills is battery failure. If you find yourself dealing with a dead cordless drill battery, there are a few steps you can take to revive it.

Firstly, you can try reconditioning the battery. This process typically involves using a specialized charger that discharges and recharges the battery multiple times, rejuvenating the cells. Another option is to replace individual cells within the battery pack.

Finally, make sure to maintain the health of your cordless drill battery by charging it regularly and avoiding storing it in extremely hot or cold environments. With these tips in mind, you can keep your cordless drill battery in excellent condition and avoid the hassle of dealing with a dead battery in the future.

Storing the Battery Correctly

When it comes to maintaining a healthy battery, storing it correctly is just as important as using it properly. Ideally, you should store your battery in a cool, dry place, away from direct sunlight. Avoid storing it near heat sources or in damp areas, as this can lead to corrosion and permanent damage to the battery.

It’s also a good idea to remove your battery from any device you’re not using for an extended period of time, as leaving it connected can slowly drain the battery and reduce its overall lifespan. When storing your battery, keep it in an upright position and avoid jostling or dropping it, as this can also cause damage. By taking these simple steps to store your battery properly, you can help ensure it maintains its health and longevity for years to come.

Regularly Charging and Discharging the Battery

Maintaining a healthy battery involves regularly charging and discharging it. Just like how our bodies need exercise to stay healthy, our batteries need to be used to prevent degradation. A battery that stays idle for long periods of time may suffer from capacity loss due to the chemical reactions inside it.

Therefore, it’s recommended to cycle the battery at least once every few weeks. This means disconnecting the power supply and using the device until the battery drains completely, then recharging it fully. However, it’s important not to overdo this, as frequent over-discharging can actually harm the battery’s lifespan.

A good practice is to keep the battery level between 20-80% as much as possible. This ensures that the battery gets used regularly without being exposed to the stresses of extreme charge levels. By following these guidelines, you can prolong your battery’s lifespan and keep it healthy for longer.


In conclusion, reviving a dead cordless drill battery is not rocket science – it’s just applying some basic principles and using common sense. From giving it a good charge to removing any corrosion and using a little brawn to jump-start the battery, you can give new life to your trusty old drill. So don’t toss it out just yet! With a little TLC, your drill will be back up and running in no time.

And who knows – you might even discover a newfound appreciation for the power of a well-revived battery. Just remember, nothing in life is truly dead – it’s just waiting for someone to give it a little spark.”


Can a dead cordless drill battery be revived?
Yes, it is possible to revive a dead cordless drill battery but it may not work as well as a new battery.

What are some methods to revive a dead cordless drill battery?
Some methods include using a battery charger or trickle charger, using a multimeter to test and reset the battery, or replacing the battery cells.

How do I know if my cordless drill battery is dead?
Signs of a dead cordless drill battery include the drill not holding a charge, the battery not charging at all, or the battery losing power quickly after being charged.

How can I prevent my cordless drill battery from dying?
To prevent your cordless drill battery from dying, store it in a cool, dry place, charge it regularly, and avoid overcharging or undercharging the battery.

Should I replace or revive my cordless drill battery?
It depends on the age and condition of the battery. If the battery is old or heavily used, it may be better to replace it. If it is new or lightly used, reviving the battery may be a cost-effective option.

Can I use a different brand or type of battery for my cordless drill?
It is recommended to use the same brand and type of battery that is compatible with your cordless drill, as using a different brand or type may damage the drill or battery.

How long does it take to revive a dead cordless drill battery?
The time it takes to revive a dead cordless drill battery varies depending on the method used and the condition of the battery, but it can take anywhere from a few hours to a full day.

Rate this post
Scroll to Top