How to Make a Homemade Oil Filter Wrench in 5 Easy Steps

Struggling to remove your car’s oil filter? You’re not alone. Many people find it challenging to remove a stuck filter without an oil filter wrench. While you can purchase one at an auto parts store, it’s not always convenient or cost-effective.

Instead, why not make your own homemade oil filter wrench? With a few simple materials and some DIY know-how, you can have a custom filter tool in no time. In this blog, we’ll show you how to make a homemade oil filter wrench that will come in handy for all your oil changes. Get ready to save time and money while keeping your vehicle running smoothly.

Gather Necessary Materials

To make a homemade oil filter wrench, it is essential to first gather all the necessary materials. You will need to have a sturdy metal pipe, a hacksaw, some duct tape, and a towel or rag. The metal pipe should be wide enough to fit around the oil filter, and long enough to serve as the handle for your wrench.

Using the hacksaw, carefully cut a series of notches around one end of the pipe, ensuring that they are evenly spaced and deep enough to grip onto the filter. Once you have done this, wrap some duct tape around the notched end of the pipe to prevent it from slipping while you use it. Finally, wrap the towel or rag around the filter to protect it from any additional scratches or damage while you are removing it.

With these materials in hand, you should be fully equipped to make an efficient and effective homemade oil filter wrench that will save you both time and money.

list of tools and materials needed

When it comes to a do-it-yourself project, it’s important to gather all the necessary materials before starting. For a successful project, you’ll need the right tools and materials. Some essentials include a measuring tape, power tools, a level, and a saw.

Other materials to consider include wood, screws and nails, sandpaper, paint, and brushes. Whether you’re building a bookshelf, a table, or refinishing a piece of furniture, ensuring you have everything you need will save you time and frustration. Remember, it’s better to have more materials than not enough; you can always return unused items.

By gathering the necessary materials beforehand, you’ll be able to start your project smoothly and without any interruptions.

how to make a homemade oil filter wrench

Prepare the Oil Filter Wrench Body

If you’re wondering how to make a homemade oil filter wrench, the first step is to prepare the oil filter wrench body. To do this, you’ll need a piece of metal tubing that is slightly narrower than your oil filter and at least a foot long. Using a hacksaw or tubing cutter, cut the tubing into two equal pieces.

Next, use a bench grinder or file to smooth the edges of each piece. This will help prevent any sharp edges from damaging your oil filter. Once you’ve done this, you can drill a hole in each piece of tubing near one end.

This is where you’ll attach the handles later on. You can use a drill press or handheld drill to make the holes. Be sure to measure carefully to ensure that the holes are in the same location on both pieces of tubing.

With the oil filter wrench body prepared, you’re ready to move on to the next step.

Step-by-step instructions on making the wrench body

If you want to change your car’s oil filter smoothly and efficiently, then you need a proper oil filter wrench. Making this wrench body is easy and requires only a few simple tools. To begin, select a suitable aluminum pipe with a diameter of around

5 inches. Take a hacksaw and cut the pipe into two equal halves, creating the wrench’s body. Next, use sandpaper to smoothen both ends and remove sharp edges, ensuring assembling and disassembling processes are easy.

Then drill a hole on one end of the wrench body, where you will install the tap handle. Make sure the hole’s diameter matches the size of the bolt. After that, thread the bolt with a tap.

Now take the tap handle and screw it into the hole with the bolt, making sure it fits snugly. Finally, give it a good cleaning and get it ready to use. That’s it! You have successfully prepared the oil filter wrench body, which will make changing your car’s oil filter a breeze.

Keywords: oil filter wrench, aluminum pipe, hacksaw, sandpaper, tap handle, drilling.

Add an Adjustable Handle

If you’re looking for a homemade solution for opening your tight oil filter, you can create your own oil filter wrench with an adjustable handle. This simple tool requires only a few items which you can find in your local hardware store. Start by finding a piece of metal bar that has a thickness of about ¼ inch.

The length should be around 12 inches, but this depends on the size of your oil filter. Next, take a hacksaw and cut a slot in the center of the bar that’s wide enough to fit around the filter. Then, drill a hole in the center of the bar to attach a bolt and nut.

Slide a wrench over the bolt and then attach a handle to the other end of the bar. Use the wing nut to tighten the bolt and secure the wrench onto the filter. You can adjust the handle’s position to provide extra leverage when turning the filter, making it easier to twist off.

This homemade oil filter wrench is a great addition to your DIY toolbox and makes changing your oil filter a breeze, saving you time and money at the auto shop.

Step-by-step instructions on adding an adjustable handle

Are you tired of carrying a heavy bag with an uncomfortable handle? Adding an adjustable handle to your bag can make carrying your belongings much more comfortable. To get started, you’ll need a few supplies: a sturdy strap that matches the dimensions of your bag, a slider buckle, and two D-rings. First, measure the length of the strap needed to accommodate your preferred handle length.

Then, sew one end of the strap onto the bag, making sure it’s secure. Next, thread the other end of the strap through the slider buckle and sew it onto the bag. Finally, attach the D-rings to the end of the strap and adjust the length of the handle to fit your comfort level.

With these simple steps, you’ll have a sleek and adjustable handle that looks great on any bag.

Test the Wrench

If you need to change your car’s oil filter, but don’t have an oil filter wrench, don’t worry! You can easily make one at home with a few simple tools. To start with, you’ll need a metal pipe and a hose clamp. The pipe should be just slightly larger than the oil filter.

Slip the hose clamp around the end of the pipe and tighten it with a screwdriver. This will create a loop at the end of the pipe that will hold the filter securely. Then, position the wrench over the filter and turn it counterclockwise to remove it.

Once you’ve removed the old filter, you can slip the new one into place and tighten it by turning the wrench clockwise. With this homemade oil filter wrench, you’ll be able to change your car’s oil with ease, and without having to spend money on a store-bought tool. Give it a try and see how easy it can be!

Tips and tricks for testing and using the homemade oil filter wrench

When it comes to testing your homemade oil filter wrench, there are a few things to keep in mind to ensure it works properly. First, make sure the wrench fits snugly around the filter before trying to turn it. If the fit is loose, the wrench may slip and damage the filter.

Additionally, be sure to turn the filter in the correct direction – typically counter-clockwise to loosen it. It’s also important to use a moderate amount of force – too much can break the filter, while too little won’t loosen it. Finally, if your wrench is adjustable, test it on a few different sized filters to make sure it can handle various types of cars and filters.

By following these tips, you can ensure that your homemade oil filter wrench is safe and effective to use on your vehicle.


All in all, making your own oil filter wrench may seem like a daunting task, but it’s actually quite simple with the right tools and materials. Plus, it’s a fun DIY project that will save you money in the long run. With a few twists and turns, you can have a custom-made wrench that fits your filter perfectly and gives you the grip you need to tighten or loosen it without any hassle.

So next time you’re in a bind and can’t find your trusty wrench, don’t panic – just grab some PVC pipe and get to work!”

Recap of the process and benefits of making your own oil filter wrench

After all the hard work and effort you put into creating your own oil filter wrench, it’s time to test it out and see if it works as well as you hoped. First, make sure the wrench fits snugly over the filter before trying to remove it. If it’s too loose or tight, you may need to make some adjustments to ensure a proper fit.

Once the wrench is in place, gently turn it counter-clockwise to loosen the filter. If it’s working correctly, you should feel the filter start to loosen and spin freely. Not only is making your own oil filter wrench a fun and fulfilling DIY project, but it also has practical benefits.

By creating your own wrench, you can save money and time, as you won’t have to spend extra cash on a pre-made tool or wait for one to be shipped to you. Plus, you can customize the wrench to fit your specific needs, making it more ergonomic and comfortable to use. Overall, creating your own oil filter wrench is a rewarding experience that will have you feeling proud and accomplished every time you change your car’s oil.


What materials do I need to make a homemade oil filter wrench?
You will need a sturdy piece of metal or plastic, a drill, and a file.

Can I use a homemade oil filter wrench on any type of vehicle?
It depends on the size and shape of the oil filter. Make sure your homemade wrench fits snugly around the filter and can apply enough torque to loosen it.

How do I shape the metal or plastic for my homemade oil filter wrench?
Use the drill to make a hole in the center of the material and then use the file to shape it into a circle with notches on the inside for gripping the oil filter.

Can I save money by making my own oil filter wrench instead of buying one from a store?
Yes, making your own oil filter wrench can save you money and allow you to customize it to fit your specific needs.

How do I use a homemade oil filter wrench?
Slip the wrench over the filter and use it to turn the filter counterclockwise to remove it from the vehicle.

What are some common mistakes to avoid when making a homemade oil filter wrench?
Avoid using weak materials that may break or warp under pressure. Also, make sure the wrench is the correct size and shape for the filter you will be using it on.

Is it safe to make and use a homemade oil filter wrench?
As long as you use sturdy materials and follow proper techniques for shaping and using the wrench, it should be safe to make and use at home. However, always exercise caution when working on a vehicle and wear appropriate safety gear.

Show More

Related Articles