How to Change Blade in Craftsman Utility Knife CMHT 10928: Step-by-Step Guide

Are you tired of using dull utility knife blades when working on projects around the house? Craftsman Utility Knife CMHT10928 is an excellent choice for homeowners and professionals alike, but changing blades can be a bit confusing. Don’t worry, we’ve got you covered! In this step-by-step guide, we’ll walk you through the process of changing the blade in your Craftsman Utility Knife CMHT1092 Whether you’re a seasoned handyman or a beginner, this guide will make the blade replacement process a breeze.

So, grab your knife and let’s get started!


If you want to know how to change the blade on your Craftsman utility knife CMHT 10928, it’s important to prepare yourself for the task ahead. First, make sure that the knife is turned off and unplugged if it’s corded, and that the blade is fully retracted. Next, locate the button or lever near the blade that releases the blade or blade housing.

Some models may require an additional tool to make this release. Once the blade is released, carefully remove it from the knife and dispose of it properly. Take note of the orientation of the blade so that you can install the new blade correctly.

Finally, unpackage the new blade and insert it into the blade holder with the sharp end facing outward. Make sure the blade is securely in place and release the locking mechanism, if necessary. With these steps complete, your Craftsman utility knife should be ready for use with a brand new blade.

Make sure the utility knife is not in use

When it comes to using a utility knife, safety should always come first. Before you even think about picking up the knife, make sure it is not in use. This may seem like a basic step, but it can easily be overlooked in a busy workplace.

Checking that the blade is retracted and that the knife is not resting on a surface where it could be accidentally knocked over can prevent serious injuries. It’s a good idea to create a designated area for utility knives and make sure everyone knows to always put them away properly when they’re finished. By taking a few extra seconds to confirm that the knife is out of commission, you can protect yourself and your coworkers from a potentially dangerous situation.

how to change blade in craftsman utility knife cmht 10928

Gather the required tools (replacement blade, screwdriver)

Before you begin replacing a blade on your tool, it’s essential to have the right tools. While it’s possible to change blades with just your bare hands, using a screwdriver and a replacement blade is strongly advised to ensure a smooth transition and prevent any damages. Having the right tools in place can save you a significant amount of time and stress.

Investing in a high-quality replacement blade that is compatible with your specific tool is essential. Ensure that you have a screwdriver on hand that is the right size to remove any screws holding the old blade in place. With these tools in hand, you can prepare to replace your tool’s blade in the easiest manner possible.

Remember, preparation is vital, and that includes gathering all the necessary tools before replacing a blade.

Removing the Old Blade

To change the blade in your Craftsman utility knife (CMHT 10928), the first step is to remove the old blade. Start by safely unlocking the blade using the locking mechanism on the side of the knife. Then, use a flathead screwdriver or another tool to gently pry open the blade holder.

Once the blade holder is open, carefully remove the old blade and dispose of it properly. It’s important to note that utility knife blades can be incredibly sharp, so be sure to handle the blade with care and avoid accidentally cutting yourself. With the old blade removed, you can now move on to installing a new one and securely locking it in place using the same locking mechanism.

Locate the release button on the knife

If you’re looking to swap out your old knife blade for a new one, you’ll need to find the release button first. This is the mechanism that holds the blade in place and, once released, allows you to remove the old one. The release button is typically located near the base of the blade or on the side of the handle, depending on the design of your knife.

It’s important to handle your knife carefully during this process to prevent any accidental injuries. Once you’ve located the release button, hold the knife with one hand and press down on the button with your other thumb or finger. This will loosen the blade and make it easy to remove.

With the blade removed, you can now safely dispose of it and move onto installing your new, sharp blade. By taking the time to properly remove your old blade, you’ll ensure a smooth and safe transition to your new one that will help you properly slice, dice, and chop in the kitchen.

Press and hold the release button

When it comes to replacing the blade on your power tool, it’s important to follow the proper steps to ensure your safety. The first step in removing the old blade is to press and hold the release button. This button can usually be found near the blade, and it’s designed to lock the blade in place for easy removal.

However, it’s important to note that you should never attempt to remove the blade without first pressing and holding this button, as this can be dangerous and could result in injury. Once you’ve pressed and held the release button, you should be able to easily remove the old blade and replace it with a new one. Remember to always follow proper safety precautions and consult your user manual if you’re unsure about any step in the process.

By taking your time and following the correct procedure, you can replace your power tool blade safely and efficiently.

Using a screwdriver, push the old blade forward and remove it from the knife

Removing the old blade from your knife is the first step to replacing it with a new, sharp one. To get started, you’ll need a screwdriver and a steady hand. Begin by pushing the old blade forward in the knife until it’s fully extended.

Next, use the screwdriver to loosen any screws that are holding the blade in place. Be careful not to strip the threads or damage the knife handle while doing this. Once the screws are loose, gently pry the blade away from the handle, being careful not to bend or break it in the process.

With the old blade removed, you’re ready to install the new one and get back to chopping and slicing with ease. Remember that sharp blades are key to efficient and safe knife use, so don’t delay in replacing any dull or damaged blades in your collection.

Installing the New Blade

Changing the blade in your Craftsman utility knife is an easy task that anyone can perform. First, make sure your knife is clean and free from any debris or dirt. Then, locate the blade release button on the top of the blade casing.

Press the button and slide the old blade out of the casing. Carefully dispose of the old blade and insert a new one, making sure it aligns with the grooves in the casing. Once the blade is firmly in place, release the button and give the blade a test run to make sure it’s securely in place.

Remember, safety should always come first when handling sharp objects, so use caution and common sense when changing your blade. With this simple guide, you can easily change the blade in your Craftsman utility knife CMHT 1092

Remove the protective cover from the new blade

Removing the protective cover from the new blade is an important step in the process of installing a new blade. It may seem like an obvious step, but many people overlook it and end up damaging their new blade or even injuring themselves. The protective cover is usually made of plastic and is placed over the blade to protect it from damage during shipping and handling.

To remove it, you simply need to locate the tab on the cover and pull it off gently. Be sure to hold the blade with one hand while removing the cover with the other to avoid any accidents. Once the cover is removed, you can proceed with the installation of the new blade on your tool.

Keep in mind that the protective cover should be disposed of properly and not left lying around to avoid any potential accidents. By following these steps, you can install your new blade safely and effectively, and get on with your project with confidence.

Align the new blade with the slot and slide it back until it snaps into place

Installing a new blade on your tool is a straightforward process that can make a big difference in the performance of your equipment. Before you begin, make sure that your tool is turned off and unplugged for safety. Position yourself in a comfortable and stable position and focus on the slot where the old blade used to be.

To install the new blade, align it with the slot and slide it back until you hear a satisfying snap. This will indicate that the blade is securely in place. Ensure that the blade is aligned and seated correctly to avoid the blade coming loose during use.

A loose blade can pose a safety hazard and interfere with your work. Remember that using sharp and properly installed blades is the key to achieving precise cuts and a job well done. With this simple step, you can get back to your project in no time and produce flawless results.

Testing and Finishing Up

If you own a Craftsman utility knife CMHT 10928, you may need to change the blade from time to time. Fortunately, it’s a relatively quick and straightforward process. To begin, disengage the locking mechanism by sliding it to the side, which will release the current blade.

Then, carefully remove the old blade and replace it with the new one, ensuring that it’s securely in place. Once the new blade is in position, slide the locking mechanism back into place, double-checking to make sure it’s engaged. It’s always a good idea to test the blade by making a few cuts to ensure it’s sharp and functioning correctly.

With these simple steps, you’ll be able to change the blade in your Craftsman utility knife, and you’ll be back to tackling your cutting tasks in no time.

Make sure the blade is securely in place

When it comes to using a power saw, safety should always be your top priority. No matter how experienced you may be, it’s crucial to take the necessary precautions to avoid any accidents. One of the most critical steps is to make sure the blade is securely in place before beginning your work.

A loose blade can easily cause the saw to malfunction, resulting in injuries or damage to your materials. To ensure the blade is properly attached, you should always follow the manufacturer’s instructions and guidelines. Double-check the tightening mechanism, making sure it’s snugly in place.

Testing the saw before use can also help you identify any potential issues, enabling you to fix them before they become a problem. Don’t forget to wear appropriate personal protective equipment, including safety glasses and gloves, to keep yourself safe while you work. By taking these steps, you can ensure a safer and more productive work environment.

Test the blade to ensure it is cutting properly

Now that you’ve sharpened your blade and removed any burrs, it’s time to test it out to ensure it’s cutting properly. Simply put, a sharp blade should effortlessly glide through the material you’re cutting without any resistance. This not only makes the job easier, but it also helps guarantee a clean and precise cut every time.

So take your newly sharpened blade and make a few test cuts on a scrap piece of material. If you notice any fraying or tearing in the material, it’s a sign that your blade still needs work. Keep sharpening and performing test cuts until you’re satisfied with the results.

Don’t rush this part, as a poorly sharpened blade can ruin your project. Once you’re confident in your blade’s ability to cut cleanly and easily, you’re ready to finish up and put it to good use on your next project.

Secure any loose components and put away the utility knife

When it comes to testing and finishing up after completing a project, it’s important to secure any loose components and put away the utility knife. Double-check that everything is properly screwed in or fastened, and that there’s no risk of anything coming loose over time. You don’t want to risk potential harm to yourself or others down the line.

Once everything is tight and secure, take the time to clean up any debris or excess materials that may have been left behind during the project. It’s also a good idea to test everything before calling it a day. Try out any moving parts or features to make sure they function smoothly, and make any necessary adjustments.

And finally, don’t forget to celebrate the hard work you’ve put in. Take a moment to appreciate your accomplishment and pat yourself on the back.


In conclusion, changing the blade in your Craftsman Utility Knife CMHT 10928 is like giving your trusty sidekick a makeover. It’s a quick and easy process that can transform your knife’s cutting abilities in a flash. Whether you’re slicing through rope, cardboard, or a stubborn piece of plastic, a sharp blade is key to success.

So don’t be afraid to switch things up and keep your trusty companion in top-notch condition. Happy cutting!”


1. What is the process of changing the blade in the Craftsman Utility Knife CMHT 10928? Answer: The process to change the blade in the Craftsman Utility Knife CMHT 10928 involves unlocking the blade, sliding it out, and replacing it with a new blade. 2. Can I use a different brand blade in the Craftsman Utility Knife CMHT 10928? Answer: While it’s recommended to use Craftsman blades for optimal performance, other brands’ compatible blades can also be used. 3. How often should I replace the blade in my Craftsman Utility Knife CMHT 10928? Answer: This depends on the frequency of use. Regular users may need to replace blades every few weeks or months, while infrequent users may only need to replace the blade once a year. 4. Is there a safety mechanism in the Craftsman Utility Knife CMHT 10928 to prevent accidental blade release? Answer: Yes, the knife is designed with a lock mechanism that secures the blade in place during use and prevents accidental release. 5. What should I do with the used blade from my Craftsman Utility Knife CMHT 10928? Answer: Used blades should be disposed of properly in a sharps container or other safe disposal method. 6. Are replacement blades easily accessible for the Craftsman Utility Knife CMHT 10928? Answer: Yes, replacement blades are widely available and can be purchased at most hardware stores or online. 7. How can I ensure that my Craftsman Utility Knife CMHT 10928 remains in good condition? Answer: Regularly cleaning the knife, keeping it dry, and storing it in a safe place can help prolong the knife’s lifespan and ensure optimal performance.

Show More

Related Articles